Fairing set race GP-T, Honda VFR400 NC35
€751.18
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0164
SKU: hon-10632 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Section secondary A stainless RH exit, VFR750F gen 4, 94-97
€105.03
Section, Secondary A, R.H Exit, VFR750F, Gen 4, ’94-’97
Used on: Right Hand Exit Full Race Systems, VFR750R, Gen 4
EXPS-0131 Set, Pipe, Full Race System, R.H Exit, VFR750F, Gen 4, ’94-‘9, (No Silencer)
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0134 Set, Pipe, R.H Exit, Full Race System, Oval Carbon/Carbon End Cap Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer, VFR750F, Gen 4, ’94-’97
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer, VFR750F, Gen 4, ’94-’97
TYGA no: EXPT-7119
SKU: hon-11036 Categories: ALL products, exhaust system replacement parts, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Front Fender white, Honda MSX125 GROM
€88.02
Front Fender MSX125 Grom, White
TYGA no: 61100-K26-900ZC
SKU: MSX-10099 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSteering Stopper, MC18
€20.02
Steering stopper for race use. Reduces degree of movement in steering. Easy to attatch using hole for brake hose clamp on triple clamp.
TYGA no: TPER-0013
SKU: hon-10746 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, NSR250 MC18, Various partsAir Box Seal Kit, 4 pcs, Honda CBR250RR MC22 /RVF400 NC35
€24.09
Air Box Seal Kit, 4 pcs, Honda CBR250RR MC22 /RVF400 NC35
Litetek Airbox Seal kit, 4 pcs made from Viton®
Fits:
Honda CBR250RR MC22
Honda RVF400 NC35
TYGA no: AS-001
SKU: alg-10346 Categories: ALL products, Carburettor Service Kits,, CBR250RR MC22, Honda, RVF400RR NC35, Various partsSeat Pad (reproduction), HRC RS125 NX4
€22.73
Holder, Carbon, Brake Hose, NSR500V Style
This carbon brake holder is a faithful reproduction of HRC part 43150-NX6-000 used on the HRC NSR500V GP bike.
It allows for removal of the stock chain guard by providing a safe way of securing the rear brake line on any Pro Arm model such as the MC28, NC30 and NC35. To install this holder, it is necessary to drill and tap two small mounting holes in the swing arm to secure the holder using the bolts and washers provided with the holder. The holder is also supplied with cable ties and rubber hose suitable for braided brake lines in order to keep the brake line held in position while at the same time looking neat and tidy.
Important: care should be taken during installation to allow adequate clearance of the brake line with the chain and rear wheel when the bike is being ridden allowing for movement due to suspension etc.
TYGA no: BPSP-0009
SKU: hon-11421 Categories: ALL products, Bodywork and carbon, High performance, Honda, NSR500V NX6, RS250R NF5 / NX5, RS250R NXA, Various partsKit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
€2,468.27
Kit, Fairing Set, Carbon, Honda NX5 RS250R (1995 NSR250 Style)
Complete Carbon Bodywork kit which consists of the following products:
Upper Cowling Race, Carbon, NX5 RS250R (Late Model Style) (BPCU-9036)
The Carbon upper fairing is modelled off the 1995 NSR250 racer but will fit any NX5 which has the ram air through the fuel tank system.
Lower Cowling, Carbon, NX5 RS250R (Late Model Style) (BPCL-9036)
The Carbon lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell.
Seat Cowling Race, Carbon, NX5 RS250R (1995 NSR250 Style) (BPCT-9036(p))
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors.
Seat Support NX5 RS250R (BPCX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
Made to order, takes approx 1 to 2 weeks to be ready for shipping
TYGA no: BPFS-0189
SKU: hon-10977 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopStep kit replacement right side assy, KTM RC125/200/390
€40.16
Tyga Step Kit Replacement Right Side Hanger, (Adj.) KTM RC125/200/390 Assy.
Replacement right hanger for your TYGA Step Kit. Complete with mounting bolts.
TYGA no: STAH-0048B
SKU: ktm-10088 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390