Carbon chain guard, Kawasaki ZX10R 2011-13
€123.76
High quality carbon products, perfect fitment and easy to install. Gives your bike that SBK look
Lightweight carbon fibre direct replacement for Kawasaki OEM item. Predrilled for use with stock mounting hardware.
(TYGA logo is applied after clearcoat and can be eaily removed)
Set pipe Full race system WSS300 (race), KTM Duke 390
€1,129.89
Set, Pipe, Full Race System, WSS300, (Race) KTM 390 Duke
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield.
WEIGHTS
EXPS-0142 (the full system) 3.8 kg
Weights Separate parts in the set:
Silencer EXSL-0074 : 1.55 kg
Final section EXPT-0078: 1.3 kg
Header pipe EXPT-0077: 0.6 kg
all other components (manifold clamp, db killer, heat shield hoses etc) 0.35
Race airbox lid, Honda NSR250 MC21/MC28
€131.29
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
This is the budget version in GRP. For carbon version, please also check out BPCX-9010.
TYGA no: BPFX-9010
SKU: hon-10383 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSection, Right #1, KTM RC390 Serpent
€45.13
Section, Right #1, KTM RC390 Serpent
TYGA no: EXPT-0055
SKU: ktm-10118 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsExhaustset stainless steel carbon silencer round, Honda CBR125
€479.79
This full race system has been specifically designed for the CBR125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too!
TYGA no: EXPS-0006Â
SKU: hon-10277 Categories: 4 stroke exhaust sets, ALL products, CBR125R/CBR150R 2004-10, Exhausts, Honda, ShopSet pipe full system with stainless oval silencer, Honda Monkey 125 2018-
€384.49
Set, Pipe, Full Race System, High Level, Monkey 125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! ( DB Killer included)
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Carbon Oval High level System for Honda Monkey 125
Silencer carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40 kg) is made from CNC machined end caps joined by a carbon fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0067 Shorty Aluminium
EXSL-0066 Shorty Carbon/Kevlar
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0065
SKU: alg-10258 Categories: 2 stroke exhaust sets, ALL products, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Honda, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop, Suzuki RGV250Subframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various parts