Tuning set CNC red GROM (msx-10158)

A set contains:

2x clutch – brake mount clamp

1x Brake reservoir cap

1x Clutch adjuster

Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.

This handy tool can be used to hold shafts, bolts or any round object securely.

Just select the correct hole size and clamp it all up in the vice

Manufactured from 6061 aluminum for strength and durability, it will clamp most metallic components without damage

Shaft sizes: 17mm, 18mm, 19mm, 20mm, 21mm & 22mm.

I’ve been using this tool for so long, for so many applications that it seemed only fair to share it!

Belly Pan, (GRP), MSX125, unpainted. Enclosed bottom makes this product suitable for race regulations requiring fluid retention capability.

High quality mounting hardware provided and easy to install.

We also offer the same product with painted and with carbon, see BPFL-7128 W/R/Y/B and BPCL-7228 shown in the photos

Important. This product needs painting and is only provided with a PU primer finish

Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.

<p><a href="{{media url="wysiwyg/01-belly-pan-fitting-bpfl-bpcl-7128-online-hl-d42c3f6e.pdf"}}" target="_self">Click here for PDF</a></p>

This new, TYGA designed 2 in 1 combination tool is a flywheel puller and RC valve removing tool all in one handy package.

Saves space in your toolbox, and less clutter on the work bench.

How to use:

Familiarise yourself with the parts (see picture).

The tool is delivered ready for use as a flywheel puller. Just screw part D into the crank, then wind the (left hand) threaded main body (part A ) into the flywheel centre and pop the flywheel off by rotating part B clockwise. Part C is not used.

For removing the RC valve shaft remove part B completely and refit from the opposite end, screwing all the way home. Then slide in the part C . Position the tool over the valve shaft and wind part C onto the RC valve shaft (left hand thread). When fully home just rotate part B anti-clockwise to pull out the shaft. The RC valve shaft seal and E-clip will probably be damaged in the process, and should be replaced. Part D is not used.

22mm and 19mm spanners (not supplied) are required for correct operation.

*Note* This tool can be used on the NSR150 to remove the RC valve shaft, but will not fit the flywheel. Please use TYTO-0007 for this job.

Kit, Seat Set, (Race GRP) Ninja 400

Complete Race Seat Set

Consist of Seat Cowling BPFT-7040(p) and Undertray BPFX-7040

See also complete Fairing Set BPFS-0175

Cowling centre white, OEM Honda part

Direct replacement for stock item, 50% of the weight

Compatible Parts:

Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only

Please note:

This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.

Beautiful, perfect fitment and give your bike that HRC look.