Carbon rear hugger, Yamaha R1 2009-14
€133.29
Lightweight carbon fibre direct replacement for Yamaha OEM item. Predrilled for use with stock mounting hardware.
TYGA no: BPCH-7402
SKU: yam-10004 Categories: ALL products, Carbon, Shop, Yamaha, YZF-1000 R1 2009- 14Carbon front fender “stock type” , Honda VFR750 RC30
€231.20
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Seat cowling right VJ21, Suzuki RGV250 VJ21
€39.40
This seat cowling is to be used in our VJ21 kit, BPFS-0121 and BPFS-0122.
This product requires panels BPFT-9021H and L. for installation.
TYGA no: BPFT-9021R
SKU: suz-10103 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Lower cowling, Suzuki RGV 250 Tyga, assy
€234.42
This lower cowling is to be used in our VJ22 kits, BPFS-0039 and BPFS-0040.
This product is compatible with upper cowling BPFU-0026. Will not fit stock Suzuki upper cowling
TYGA no: BPFL-9026
SKU: suz-10016 Categories: ALL products, Bodykit replacement parts, Bodywork, RGV250 VJ22, Shop, SuzukiHarness Extension, SC28 (94-95) Meter, Honda VFR750R RC36-2
€28.51
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0008
SKU: hon-11478 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistSection Final stainless WSS300 race system, KTM RC390
€379.52
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0078
SKU: ktm-10136 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsSilencer stainless moto maggot 2" VFR750F gen 4, 94-97
€216.82
Silencer, Stainless Moto Maggot, 50.8 mm, VFR750F Gen 4, ’94-’97, Assy
Maggot silencer with 50.8 mm. inside diameter, Assy (with springs)
Please note this is a replacement for the EXPS-0119 VFR750F Gen.4 full system.
Please also note that decibel killer model EXDK-0007 is compatible but not included with this exhaust system. Please add EXDK-0007 to your cart if you wish it to be included in your order.
TYGA no: EXSL-0082
SKU: hon-11013 Categories: ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Honda, Shop, VFR750F Gen 4, 94-97Silencer stainless steel round /carbon end cap 380mm (4 stroke) 2
€271.40
Silencer, Stainless/Carbpn End Cap, Round, 2 x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a hairline finish stainless tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0146
SKU: alg-10137 Categories: 4 stroke exhaust sets, ALL products, exhaust system replacement parts, Exhaust systems, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30, VFR750F Gen 4, 94-97