Bearing, Waterpump, MC21/28
€9.86
Bearing, Waterpump, MC21/28
TYGA no: 6000.0
SKU: hon-11083 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Set, Exhaust Chamber, Side By Side Type, Stainless Steel, RGV250 VJ23
€1,010.86
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
HEL front brake line Brembo 84mm, Honda MSX125 GROM
€76.14
Kit includes:
1x HEL Brake Line
4x Sealing Washer
1x M10x1.25 Banjo Bolt
1x M10x1.00 Banjo Bolt
45 degree banjo goes to master cylinder. 30 degree banjo goes to caliper.
Ensure Bleed nipple is at top of caliper for simple bleeding.
Route the hose through the standard brake hose retaining clips
Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.
TYGA no: BLSF-0010Â
SKU: MSX-10130 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsCarbon air duct (pair), NC35
€308.36
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPCX-0018
SKU: hon-10121 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopSeat set street, Suzuki RGV 250
€698.64
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises of the parts below which are also available separately.
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0038
SKU: suz-10014 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiFairingenset race style RVF, NC30
€667.52
This kit comprises of parts shown below. The fairing is exact as NC35* and the seat cowling is model specific to the NC30 but in the same shape as the NC35.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
Please state if you would like a tinted screen or stock shape open lowers (BPFL-0003) and we will be happy to change to suit. The fairing will need a simple stay to locate front position.
Please note that the fairings only weigh approx. 1kg for each fairing panel and 2 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg. You may want to consider two sets and save on shipping…
*Because the fairing is an exact copy fo the NC35 one, it is necessary to modify the NC30 front and upper stays to fit the positions on the NC35 panel.
TYGA no: BPFS-0042
SKU: hon-10075 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon rear hugger large , Honda CBR1000 2008 – 11
€156.29
This lightweight and attractive rear hugger replaces the stock one and gives much better weather protection and keeps road dirt away from the rear suspension.
Beautiful, perfect fitment and give your bike that HRC look.
Seal, Crank L., MC28
€9.77
Seal, Crank L., MC28
TYGA no: 91205-KV3-771
SKU: hon-11111 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28