Subframe aluminium , Honda VFR400 NC30
€453.76 €408.41
This lightweight aluminium subframe is closely modelled on the stock NC30 subframe and can be substituted for the heavy steel one with a considerable weight saving . Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, undertray, rear shock reservoir (BPCC-0046 is a direct fit), radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie the ECU, starter relay etc which are normally attached directly to the undertray.
TYGA no: TYLY-0224
SKU: hon-10984 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30Stay, Front Fender, MC28
€10.86
Stay, Front Fender, MC28
TYGA no: 61101-KV3-700
SKU: hon-11141 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Rubber ram airbox, Honda RS250 NX5
€9.13
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPSY-0221B
SKU: hon-11382 Categories: ALL products, High performance, Honda, RS250R NF5 / NX5, Various partsCarbon front fender, Kawasaki Ninja 400 2018-
€230.75
Front Fender (Carbon) Ninja 400 (2018-)
This lightweight carbon front fender replaces the plastic item, reduces unsprung weight and is an easy installation.
TYGA no: BPCF-7040
SKU: kaw-10149 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Screen clear RC30 style, Honda VFR400 NC30
€47.27
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: SCRE-0181
SKU: hon-11426 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30TYGA Bike Dust Cover, Red/White Yamaha
€65.05
TYGA no: TMER-0183
SKU: alg-10125 Categories: ALL products, Bike covers, By model, Merchandise, RD350LC 4L0, Shop, TZR250 3MA, Universal parts, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3Set, pipe full race system round stainless/carbon end cap silencer LH exit, VFR750F gen 4, 94-97
€1,155.39
Set, pipe full race system round stainless/carbon end cap silencer, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system can be used with a number of our 2″ slip on exhaust silencers
See also our sets with silencer included:
EXPS-0122 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Carbon/Carbon End Cap Silencer
EXPS-0123 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Oval Stainless Silencer
EXPS-0124 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Aluminium Silencer
EXPS-0125 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97, Round Carbon Silencer
EXPS-0126 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Carbon/Carbon End Cap Silencer
EXPS-0127 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Aluminium/Carbon End Cap Silencer
EXPS-0128 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless Silencer
EXPS-0129 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97. Round Stainless/Carbon End Cap Silencer
EXPS-0130 Set, Pipe, Full Race System, VFR750F Gen.4, ’94-’97 Maggot Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand, however, the centre stand and pillion foot rests must be removed prior to installation.
TYGA no: EXPS-0129
SKU: hon-11022 Categories: ALL products, Exhaust systems, Exhaust systems, Exhausts, Honda, RC36-2 -> RC30 replica products, Shop, VFR750F Gen 4, 94-97Carb Service Kit A, 32 pieces, Honda VFR400R NC30
€61.57
Carb Service Kit A, 28 pieces, Honda VFR400R NC30
LiteTek Carburettor Seal Kit to suit
Honda VFR400R NC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-003 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit 16010-MR8-505)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x OR-011 Float Bowl Vent O-Ring, Material: Viton 70A (Part of Honda Kit 16010-MR8-505)
4x OR-012 Fuel T-Pipe O-Ring, Material Viton 70A (Part of Honda Kit 16010-MR8-505)
4x CS-004 Choke Plunger Cap, Material: HNBR (Part of Honda Assy. 16046-MG9-681 or 16047-ML7-004)
TYGA no: CK-Honda-NC30
SKU: alg-10352 Categories: ALL products, Carburettor Service Kits,, Honda, Shop, Various parts, VFR400RR NC30