Crankshaft Bearing, A, NSR250 MC18/21/28
€106.55
Crankshaft Bearing, Left, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012A
SKU: hon-10757 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various partsBrake caliper front Red, Honda MSX125 GROM
€129.78
Brake Caliper, Front, MSX125 Grom, (Red). Genuine Nissin, 100% compatible with stock caliper, this is a direct and more attractive replacement for the stock Honda one.
TYGA no: NC2R-T014
SKU: MSX-10176 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsUpper Cowling Race, (GRP) NX5 RS250R (late model style)
€328.76
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9236
SKU: hon-10944 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopKit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
€173.72
Kit, Single Seat Cover Conversion, Green, Ninja 250R/300R 2013 -18
TYGA no: 99994-0354-777
SKU: kaw-10160 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shoplower cowling (GRP), stock shape NSR250 MC21/MC28
€241.47
Lower Cowling (GRP), NSR250, MC21/28, Stock Shape, Assy
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings: MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-0001 for similar product
TYGA no: BPFL-9001
SKU: hon-10915 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Silencer stainless steel/ carbon cap with carbon cover, Yamaha R25 / R3
€346.50
Set, Pipe, Slip On, Stainless, Oval/Carbon End Cap, Yamaha R25/R3
Hand assembled with brushed stainless steel sleeve. Precision made CNC machined mount cap, with sleek carbon end cap.
This is a direct bolt on to the standard R3 headers. Just remove the stock silencer and exhause cover and fit the TYGA silencer and exhaust cover.
This silencer looks great, significantly reduces weight without adding any noticeable volume.
(May not comply with noise regulations for some states and territories).
Note: This product is supplied with a genuine replacement exhaust gasket to fit where the TYGA pipe joins the Yamaha header pipes. It also includes a special high temp resin exhaust guard BPCC-7033 to complete the transformation.
TYGA no: EXPS-0059
SKU: yam-10050 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Shop, Yamaha, YZF-R25/R3Set pipe full system with carbon oval silencer, Honda Monkey 125 2018-
€413.39
Set, Pipe, Full Race System, High Level, Monkey 125, Carbon Oval/Carbon End Cap
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
All fitting hardware included.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125 compared to the red trace, which is after installing the TYGA Full System set (EXPS-0105)
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0104 Moto Maggot High level System for Honda Monkey 125
EXPS-0106 Stainless Oval High level System for Honda Monkey 125
Drilling Jig set, Fuell tank mount holes, RC36-2 RC30 style
€18.59
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0050
SKU: hon-11469 Categories: ALL products, Bodywork, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various parts