Pro-arm Hub spacer 3mm
€22.56
Pro-Arm Hub Spacer, 3mm
TYGA no: TPER-0014-3
SKU: hon-10688 Categories: ALL products, By model, By product, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsCarbon swing arm covers left, Suzuki RGV250 VJ22
€153.76
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020L
SKU: suz-10221 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiTop triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSeal, Crank Centre, MC28
€4.41
Seal, Crank Centre, MC28
TYGA no: 91301-KV3-771
SKU: hon-11105 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Kit, Complete Body Set, Stock Shape, with Seat Cover, NC30, Painted Type 1
€1,643.89
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0218
SKU: hon-11403 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Fairing set race RC211V, NC35 kit
€813.47
Fairing set race RCV211, NC35 kit
This set of bodywork comprises of the parts shown in the picture which are also available separately
*A clear screen is provided.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0014
SKU: hon-10128 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopStay, Comp, Upper Cowling, Ninja 250R 2008 -12
€114.70
Stay, Comp, Upper Cowling, Ninja 250R 2008 -12
TYGA no: 39137-0058-18R
SKU: kaw-10205 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopSplitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30