Set, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Tyga Step Kit Replacement Left Side Hanger, MSX125 Grom, Silver, Assy.
€90.48
Replacement left hanger for your MSX125 Grom TYGA Step Kit. Complete with mounting hardware and bushes.
Wheel, Rear, Aluminium Spacer Kit, Ninja 400
€28.25
Wheel, Rear, Aluminium Spacer Kit, Ninja 400
Replace the heavy steel rear wheel spacers with these “self-retaining” lightweight 6061-T6 aluminium spacers.
The outer spacers are designed with a lip that slips in behind the seal to retain the spacers in the wheel. No more lost spacers rolling across the workshop floor!
Lighter weight allows the suspension to react more positively, so better handling and good looks!
TYGA no: TPER-0058
SKU: kaw-10096 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 400R 2018-, Various partsCarbon chain guard, NC30 NC35
€114.99
Carbon chain guard for NC30/35. Replace the nasty plastic original one with this lightweight elegant carbon one to help with important unsprung weight reduction. Retains the function of supporting rear brake line. Mounting hardware provided.
Beautiful, perfect fitment and give your bike that HRC look.
TYGA no: BPCX-7417
SKU: hon-10159 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30VHM Cyl. Headset KTM 300SX/EXC ’08-
€327.95 €284.25
VHM Cyl. Headset KTM 300SX/EXC ’08-> (alg-10209) AA33109VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (26.25cc)Optional inserts:– blind– 28.50This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33109
SKU: alg-10209 Categories: ALL products, KTM, KTM MX, Motocross, Shop, VHM productsRear sprocket aluminium gold, KTM RC390
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0114-39 -TYSR-0114-48
SKU: ktm-10018 - ktm-10023 Categories: ALL products, By product, CNC parts, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 125/200, RC 390, RC390 2022-, Sprockets, SprocketsSidehanger right, RGV250 (Tyga)
€62.13
Replacement right hanger for your RGV250 VJ22 TYGA Step Kit. Complete with mounting bolts
TYGA no: STAH-0006
SKU: suz-10051 Categories: ALL products, CNC parts, CNC parts, RGV250 VJ22, Shop, SuzukiCarbon upper cowling race TYGA, Suzuki RGV 250
€742.02
One of our most popular bodykits from last years.
This kit comprises of the parts shown in the picture which are also available separately.
Light and strong, update your RGV250 with these great parts.
* A clear screen is provided unless you specify tinted in the comment box at check out
This kit is supplied with all additional fasteners required to mount it to a stock VJ22
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPCU-9126
SKU: suz-10227 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki