Upper cowling RSW race, Honda NSR250 MC21/MC28
€220.69
Stylish replacement fairing based very closely on the GP250 class RS250RW World championship winning race bike design. This upper cowling has been modified to be used on the MC21 and MC28 street bike and to be installed with our RSW style lower cowling BPFL-9014 combining for the ultimate in NSR250 race fairing design. We recommend this fairing to be used with TYLY-0001 GP upper stay.
Compatible Parts:
BPFL-9014 lower cowling
requires screen SCRE-0079 and SCRE-0080
TYGA no: BPFU-9022Â
SKU: hon-10244 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, By product, Honda, NSR250 MC28, ShopCarbon silencer guard WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0076
SKU: ktm-10201 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsSilencer stainless steel Motogp style (4 stroke) 50mm maggot
€205.90
The TYGA Moto Maggot stainless silencer, with 50.8 mm inside diamter, is definitely not for the fainthearted. The music emitted at full volume is simply ear drum shattering and would not be out of place in the MotoGP paddock.
 
We’ve used our two stroke pipe manufacturing technology to bring you this all stainless construction of hand rolled and hand welded cones. The 2 baffle core is also stainless. The silencer is then packed with glass before final welding.
 
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 (approx. 50mm) external diameter tail pipe.
 
The Maggot is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are supplied with the kit, which can then be welded to any other system that may need modification to fit the silencer.
 
Please be aware that this silencer is exceptionally loud! It will, however, get you noticed wherever you go!
The overall length is approx. 320 mm. and fits onto a 2 pipe section. The clamping area is 4 in diameter. Contains an inner baffle tube and some sound deadening material but is still very loud; this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system will definitely NOT comply to specific country noise emission regulations and is NOT homologated for street use. You have been warned!
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
<a title= maggot 50mm href= {{media url= wysiwyg/04-maggot-excl-0013-50-a22866c7_1_.8mm.pdf }} target= _self >Click here for PDF</a>
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/hfUVXzAkxmM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXSL-0013
SKU: alg-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Bike cover Honda
€58.87
Genuine Honda Bike Cover, fitted with elastic for secure installation. I supplied with its own storage pouch.
TYGA no: 08P34-KPP-700
SKU: hon-10474 Categories: ALL products, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, PCX150, RS250R NF5 / NX5, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2Handlebar Clamp, Right, Black, 48 mm.
€98.58
Handlebar Clamp, Right, Black, 48 mm.
Replacement handlebar clamp for handle bar set TYLY-1012
Tail tidy street legal set , Honda MSX125 2021-
€101.18
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: TYLY-0274
SKU: msx-10498 Categories: ALL products, Honda, MSX125 2021-, Shop, Various partsCowling left Blue, Honda MSX125 GROM
€23.35
Cowl, R., RR., Blue
TYGA no: 77225-K26-900ZE
SKU: MSX-10229 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSeat set race GP-T, Honda VFR400 NC30
€968.19
The ultimate seat set for your V4 Honda!
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC30. As well as bringing the NC30 up to date, it also offers huge weight saving and easy fitment and removal. The seating position is higher and roomier compared to the stock NC30 postition, bringing it into line with modern sports bikes ergonomics. The seat pad is designed to give plenty of feedback for race use and the cowling has plenty of space for tucking in behind the fairing along the straights. The seat cowling is designed so that the fuel tank can be removed while leaving the seat cowling installed, allowing for quick jetting changes etc.
The kit is supplied with all mounting hardware including subframe and battery box.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0165
SKU: hon-10631 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, VFR400RR NC30