HEL rear brake line standard, Honda MSX125 GROM
€76.14
HEL rear brake line standard, Honda MSX125 GROM (msx-10129)
Kit includes:
1x HEL Brake Line
4x Sealing Washer
2x M10x1.25 Banjo Bolt
20 degree side bend banjo goes to master cylinder. 45 degree banjo goes to caliper.
Route the hose through the standard brake hose retaining clips.
TYGA no: BLSR-0009Â
SKU: MSX-10129 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsWaterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various partsCarbon frame covers (pair), Honda CBR1000 2008-’15
€495.59 €305.74
Frame Cover, Pair, (Carbon) 2008-15 CBR1000RR
These lightweight carbon covers fit over the frame and it is designed to protect against scratches and damage to the frame in the event of an accident. It has a layer of carbon/Kevlar inside for abrasion resistance.
TYGA no: BPCC-7001
SKU: hon-10527 Categories: ALL products, Carbon, CBR1000 2008-11, CBR1000 2012-, Honda, ShopExhaust Chamber, Left, GP Type, Stainless Steel, Aprilia RS-250
€327.05
Bare replacement left side chamber for EXCS-0008
Kit, Bodywork, GRP, stock shape, with GRP tank, NSR250 MC28, Painted Rothmans
€2,968.09
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFS-0185
SKU: hon-10969 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC28, Shop, SilencersFuel Tap / Pet Cock, MC16/MC18
€115.94
Fuel Tap / Pet Cock, MC21/28
TYGA no: 16950-KV3-005
SKU: hon-11081 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC18Carbon front fender stock shape , Honda NSR250 MC18/MC21/MC28
€165.87
Real Carbon fibre reproduction of the stock OEM Honda front fender. Finished in high gloss, adds beauty and reduces unsprung weight. (weight of part approx. 0.2 kg)
TYGA no: BPCF-0009
SKU: hon-10480 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopSeat set RVF , NC35 (no taillight holes)
€242.59
Stock shape seat cowling, race with no taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please note, to order this product with taillight holes, please order BPFT-9004.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM seat pad
TYGA no: BPFT-9104
SKU: hon-10420 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop