Pro-arm Hub spacer 1mm
€12.66
Pro-Arm Hub Spacer, 1mm
TYGA no: TPER-0014-1
SKU: hon-10686 Categories: ALL products, By model, By product, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various partsLower cowling (GRP) red, Honda MSX125SF GROM
€332.31
Lower Cowling, (GRP) red MSX125SF, Grom 2nd gen 16-17
Lower Cowling, (GRP), red, MSX125SF. Bling up your GROM with this cool component. High quality mounting hardware provided and easy to install.
This Lower Cowling is also available as BPCL-7428 in Carbon
TYGA no: BPFL-7428R
SKU: msx-10384 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopCarbon meter cover silver, NSR250 MC28
€36.50
Attractive carbon cover for MC28 meter assembly.
For fitment, simply remove the three retaining bolts, stick on the cover and replace the bolts
TYGA no: BPCC-0003
SKU: hon-10246 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, By model, Carbon, Honda, NSR250 MC28, ShopCarbon swing arm covers right, Suzuki RGV250 VJ22
€151.67
Clutch Cover, Carbon, RGV250 VJ21/VJ22
Carbon cover to replace the plastic stock one on the Suzuki RGV250 VJ21 and VJ22
TYGA no: BPCC-9020R
SKU: suz-10222 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon sprocket cover, Honda Monkey 125 2022 5 speed
€126.94
Rear Fender, Carbon, stock shape, Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
IMPORTANT, Rear fender BPCH-7042 is not compatible with the Honda number
plate holder (part number 80100-KOF-T00 ) due to the weight of the Honda
part. We recommend when installing BPCH-7042 that TYGA registration holder
BPCK-7142 is installed instead
TYGA no: BPCX-7742
SKU: msx-10513 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopKit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
€885.87
Kit, Fairing Set (GRP), Honda NX5 RS250R (1995 NSR250 Style)
Complete Bodywork kit which consists of the following products:
Upper Cowling Race, (GRP) NX5 RS250R (1995 NSR250 Style) (BPFU-9336)
The upper fairing is modelled off the 1995 NSR250 racer, but will fit any NX5 which has the ram air through the fuel tank system. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9036.
Lower Cowling, (GRP) NX5 RS250R (Late Model Style) (BPFL-9036)
The lower fairing is modelled off the ram air version of the NX5 RS250R but will fit any NX5 which uses a stock upper as far as we can tell. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with upper cowling BPFU-9036
Seat Cowling Race (GRP) NX5 RS250R (1995 NSR250 Style) (BPFT-9036)
This seat cowling is modelled on the 1995 factory NSR250 racer look as ridden by Ukawa, Okada, Romboni, Jacque etc. and is a direct fit for the NX5. The seat cowling uses a special seat support which bolts to the subframe using existing mounting lugs and the seat cowling is covered underneath for streamlining and protection of the PGM and connectors. It is easy to install and being made from high quality epoxy resins and top quality glass fabric is strong and crash resistant.
Seat Support NX5 RS250R (BPFX-9036)
Screen Clear NX5 RS250R (1995 NSR250 Style) (SCRE-0176)
TYGA no: BPFS-0188
SKU: hon-10980 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopLower Triple Clamp, CNC Black, RVF400 forks/NSR shaft
€367.66
CNC machined TYGA lower triple clamp for your NSR250 to take RVF400 NC35 forks.
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set:
TYLY-1541Triple Clamp Set, CNC Black, NC35 Forks to fit MC21
TYLY-1741Triple Clamp Set, CNC Black, NC35 Forks to fit MC28
Racing stepkit black/SILVER adjustable, Honda MSX125 GROM
€477.27 €395.87
Racing Rear Set Kit, Adjustable, black with SILVER Slot Cover, MSX125 Grom
With all major components desgined specifically for the MSX125 Grom in mind, this rear set kit is the best on the market. Designed in-house by TYGA Performance using the latest CAD/CAM software, these tough CNC machine-made step kits are made from top quality, aircraft grade aluminium and utilise TYGA’s unique and elegant system to provide ten different foot peg positions. The kit features levers moving on ball bearings to give precise and smooth movement. In addition to the technical specifications, emphasis has also been given to make the steps as uncluttered as possible with the rear master cylinder hidden from view and no unsightly unused holes on view etc. The kit comes complete, ready to bolt on with stainless steel fasteners and carbon heel guards. With individualism in mind, there is a choice of ten colour combinations available and all components are available as replacement or separate items. Be sure to order the correct colour combination. Some photos below are for reference and show different colours to this product.
Note, no real brake light provision. If required, we recommend installation of inline pressure switch.
You can only use these steps on the MSX125SF if you have a TYGA exhaust
<a href= {{media url= wysiwyg/05-fitting-msx-step-kit-online-6e1bce74.pdf }} target= _self >Click here for fitting instructions</a>
TYGA no: STAA-1019SILVER
SKU: MSX-10246 Categories: ALL products, CNC parts, Honda, MSX125 2013 - 2015, MSX125 2021-, MSX125SF 2016 -2020, Shop, Steps, Steps