Side cover (pair), NC30
€33.11
Side Covers in GRP for BPFT-9117
TYGA no: BPFC-9117
SKU: hon-10091 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Decal, Tail Cowl Cover 250R Black, Ninja 250R 2008 -12
€2.17
Decal, Tail Cowl Cover 250R Black, Ninja 250R 2008 -12
TYGA no: 56054-0131
SKU: kaw-10227 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon fairing side stay pair, Suzuki RGV250 VJ21/22
€70.24
Fairing Side Stay, Carbon, Set, RGV250 VJ21/VJ22
These fairing stays are direct replacements for the Suzuki OE part number 94522-12C-00-000 on the VJ21 and VJ22 RGV250.
TYGA no: BPCC-0061
SKU: suz-10140 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsCarbon Headlight cover, Honda MSX125 GROM
€191.80
Carbon headlight cowling, let your bike stand out from the crowd
TYGA no: BPCU-7028
SKU: MSX-10116 Categories: ALL products, Bodywork and carbon, MSX125 2013 - 2015, MSX125 GROM, ShopCover, Lower Left, GRP, Glossy Black, Assy, VFR750 3rd Gen, 90-93
€122.86
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPFX-7049
SKU: hon-11336 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon exhaust guard TYGA, Yamaha R25 – R3
€63.97
Exhaust Guard, TYGA Slip On, Yamaha R25/R3
Made from specially formulated high temperature resin, this exhaust guard adds the finishing touches to the TYGA Performance slip-on exhaust transformation. Fits in minutes and adds a factory GP touch to your bike.
Note, this product is only suitable when used with TYGA Performance R25 and R3 slip-on exhaust systems EXPS-0059 and EXPS-0060
Section Final stainless WSS300 race system, KTM RC390
€379.52
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPT-0078
SKU: ktm-10136 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsBodykit complete MiniRacerXtreme " REPSOL", Honda MSX125SF GROM
€2,456.31
Bodywork Set, MRX, MSX125SF Second Generation Grom, Painted Repsol
This bodywork set comprises of the exclusive TYGA Performance MRX body work as shown in the photos. Using special paint pigments to obtain the bright livery as on the factory MotoGP bikes, this kit is supplied with the graphics shown in the photos. By ordering the kit pre painted, it will save money and time over getting them painted locally. This kit can be fitted in day so there is no down time for your riding!
This kit will instantly transform your bike and make it unrecognizable from the way it looks today. The kit is supplied with all additional mounting hardware including the meter stay, mirrors and headlight. Note turn signals, front fender, and tail tidy are not supplied with this kit but can be ordered from our website store. We can even paint for free a set of brand new wheels to match the orange if you order the wheel from our site. We also recommend the ultra sticky IRC tyres shown here which were developed especially for the MSX125 grom.
The quality of the paint is excellent but please remember for the most part, this is a handmade and hand painted product. This paintwork is done by our own highly experienced and skilled paint sprayer K Pong. He does all the paintwork for TYGA Performance including our project bikes you see on our website and he also does all our production parts. We wouldn’t trust anyone else!
Note; at the moment, due to strong demand, there is a waiting list of approx 2 weeks for this product. It is important you make your order early to receive it at the earliest possible date.
This body kit MUST be used with a high level exhaust because there is no space for the belly type in the fairing lower. We recommend the following exhaust systems:
EXPS-0065
EXPS-0066
EXPS-0067
Comes with a free MRX Bike Dust Cover
Note this kit is specific to the MSX125 Grom second generation (2016-2017). For the first generation (2013-2015) Repsol kit, please order BPFS-0155 Repsol
TYGA no: BPFS-0155 RepsolÂ
SKU: MSX-10392 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MRX, MSX125 GROM, MSX125SF 2016 -2020