Bracket rear brake CNC silver 84mm Brembo, Honda NSR250 MC28
€110.40
Bracket, Rear Brake, 84mm Brembo Conversion, Silver, MC28 and NC35. Consists of main caliper bracket and spacer for the rear disc brake to get the correct clearance.
This is to fit the 84mm pitch rear caliper.
Also available in black (TYLY-1089)
Applicable with the following Brembo model calipers:
Rear caliper P2
Code 20.6951.46
and
Rear CNC caliper P2
Code XA7.29B0
TYGA no: TYLY-0089Â
SKU: hon-10431 Categories: ALL products, CNC parts, CNC parts, CNC parts, Honda, NSR250 MC28, RVF400RR NC35, ShopSet, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer/ Carbon End Cap ,VFR750F, 3rd Gen,
€1,271.03
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: EXPS-0153
SKU: hon-11327 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Carbon under tank covers, Honda MSX125SF
€94.45
Carbon under tank covers, Honda MSX125SF
Fits over nasty plastic stock items and transforms the appearance of your bike.
Install with double sided tape provided or with silicone sealant for a really permanent installation
TYGA no: BPCC-7428
SKU: msx-10389 Categories: ALL products, Bodywork and carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020, ShopTank filler cap racing , KTM/Triumph
€69.87
Tank Filler Cap, Keyless, Racing Type, KTM/Triumph
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for most KTM/Triumph sportsbike models.
Suitable for the following models:
Triumph
– Triumph Daytona 600/650 All Years
– Triumph Daytona 675 2006 – 2008
– Triumph Daytona 955i 1998 – 2000
– Triumph Daytona T595 All Years
– Triumph Speed Four 2002 – 2006
– Triumph Speed Triple 1050 2005 – 2009
– Triumph Speed Triple 955i All Years
– Triumph Sprint 1050 2005 – Present
– Triumph Sprint GT All Years-
– Triumph Street Triple 2007 – 2008
– Triumph Street Triple 675 2007 – 2008
– Triumph Street Triple R 2007 – 2008
– Triumph Tiger 1050 2006 – Present
– Triumph Tiger 800 All Years
– Triumph Tiger 800XC All Years
– Triumph TT600 All Years
KTM
– KTM Super Duke 990/990R All Years
– KTM Adventure 950 S All Years
– KTM Adventure 990 S/R All Years
Meterstay MiniRacerXtreme, Honda MSX125 GROM
€199.00
Bodywork Set, (GRP), MRX, MSX125 GromThis kit is the ultimate modification for your MSX125 Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors*.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125 Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.*Note, turn signal indicators, tail tidy, front fender are not included with kit but are available on this site. We recommend installation of rear sets and exhausts but they are not strictly necessay.Our MRX set only fits the first model MSX 2013-16<iframe width= 560 height= 315 src= https://www.youtube.com/embed/8eiU-sMhpRI frameborder= 0 allowfullscreen></iframe>
Set, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Upper Cowling (Street GRP), NSR250 New GP2010, Assy.
€243.42
A GP250 style upper cowling, improved for 2010. Sleeker and 300grams lighter than our previous BPFU-0005. This fairing has excellent aerodynamics for racing or road use. To be used with the parts below.
Compatible Parts:
Tyga lower cowling: BPFL-9114 Will not fit stock NSR250 lowers.
Requires headlight BPLT-0004 and screen SCRE-0084 or SCRE-0085.
TYGA no: BPFU-9005
SKU: hon-10881 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Temp gauge “race”, Honda 1/8″ NPT
€23.55
Temp Gauge, Race, Honda 1/8″ NPT
Stand alone temperature gauge for race use. Ideal for monitoring engine coolant temperature.
Pre-fitted with 1/8″ NPT adapter. Just remove the standard temperature sensor and screw in this replacement.
Displays temperature in Centigrade, up to 99.9C
Race use only. No back light function.
Supplied with 2x LR44 batteries (not fitted).
**NOTE** Some machines may use the temperature reading from the standard sensor, in which case alternative mounting may be required.
Fits:
RVF400 NC35
VFR400 NC30
NSR250 (All models)
NSR150SP
CBR400RR NC29
Also fits all Honda Motorcycles who are using thermo units with OE part numbers 37750-PC1-004 and 37750-KV3-951
TYGA no: TELC-0004
SKU: alg-10324 Categories: ALL products, By model, CBR400RR NC29, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30