Indicator, Front, Left, Ninja 250R/300R 2013 -18
€44.37
Indicator, Front, Left, Ninja 250R/300R 2013 -18
TYGA no: 23040-0107
SKU: kaw-10168 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopLink rod Tyga step replacement, NSR150/250
€20.06
Tyga Step Kit Replacement Link Rod, Female, 240 mm.
Replacement gear link rod for your NSR150, MC21 or MC28 TYGA Step Kit. (STAA-0001 and STAA-0002)
Uses M6x1 thread in one end and M6x1 L/H thread in the other. 245mm in length.
TYGA no: STAR-0001
SKU: hon-10294 Categories: ALL products, CNC parts, CNC parts, CNC parts, CNC parts, Honda, NSR150SP, NSR250 MC21, NSR250 MC28, ShopCarbon fuel tank (Ram air), Honda RS250R NX5
€1,686.37
Fuel Tank, Carbon, RS250R NX5 (Ram Air Type)
Top quality reproduction of the early ram air version NX5 fuel tank in carbon fiber.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel, Avgas 100LL to E85 (85% ethanol). Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light ( 2.45 kg)
Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts and following the stock shape, the following stock parts can be used (not included):
Fuel Cock
Breather
Front strap
Stock mounting rubbers
Filler cap and seal
Note for filler cap and seal we can supply our own TYGA version (Cap: TYLY-0178A, Seal: BPSY-0238). Note the filler cap, seal and the above list of parts are not included with the fuel tank and needs to be purchased separately
TYGA no: BPCG-0002
SKU: hon-10960 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopSilencer carbon round 43mm, Kawasaki ZXR250 2008 –
€284.06
Silencer, Carbon, Round, 43 mm. x 380 mm., Assy.
This silencer has polished stainless steel endcaps and a tough carbon tube for a lightweight and attractive finish. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is designed to fit any system with a 2" external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe. A silencer mounting clamp is also provided to secure the silencer to the bike.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
Compatible with TYGA and other systems which use a 2 inch external diameter tail pipe, this silencer uses a 4 inch x 380 mm. outside aluminium tube.
TYGA no: EXSL-0032Â
SKU: kaw-10023 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop, SilencersClutch cable dizzy club , Honda NSR250 MC18 / MC21
€41.42
lutch Cable, MC21, Dizzy Club. This attractive red clutch cable is an alternative for the Honda OE part 22870-KV3-680. It is ssuitable for MC18 and MC21 models
TYGA no: 101-92-1651-00
SKU: hon-10510 Categories: ALL products, Honda, NSR250 MC18, NSR250 MC21, Shop, Universal parts, Various parts, Various partsSet exhaust, race system double stainless silencers oval/carbon cap , KTM RC390 2014 – 2016
€962.68
Set, Pipe, Race System, RC390, Stainless Oval/Carbon End Cap.
Update your bike with this great TYGA performance, KTM power part!!
Model 2014 – 2016
This race system has been specifically developed for the KTM RC390 to maximise performance and looks. The dual under seat system eliminates any issues with ground clearance unlike some other systems on the market. In addition, in the event of an accident the exhaust is well protected than systems which have the exhaust exiting the right of the swing arm. The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decibel killer for noise reduction.
Compatibility
This exhaust can be installed on a bike fitted with the cup race bodywork or standard, with passenger pegs installed or removed. It can be installed with stock registration/turn signal holder.
For use with stanadard belly pan, we recommend the installation of the exhaust outlet cover BPFC-7431, and for use without passenger pegs, option carbon exhaust guards are available BPCC-0021L and BPCC-0021R.
Please also see EXPS-0062 for similar system.
** Attention ** if you have the EURO 4 type RC390 2016, this means with the exhaust on the right side, not the exhaust under the engine. This exhaust won’t fit, because the header is different. You need to order the full system. Please see product: ktm-10092 / ktm-10093.
Customization
Performance and Dynograph
Please refer to dynograph
A) All Standard.
B) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox/Engine all standard. Custom fuel/ignition map
C) TYGA Serpent Pipe EXPS-0061, PC-V. Airbox lid mod. No Filter. Custom fuel/ignition map
Very useful gains especially in the mid range for both B) and C), for much stronger acceleration.
The silencer was full bore. No decibel killer used.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/tqJjURpXnaU frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0061
SKU: ktm-10060 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, KTM, RC 390, ShopRacing step kit CNC silver, Honda NSR150
€330.17
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light switch provision.
TYGA no: STAA-0001Â
SKU: hon-10281 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopSeat set race RC211V, NC30 kit
€526.82
Seat set race RC211V, NC30 kit
This set of bodywork is designed to replace the stock NC30 seat cowling with the race version of our New Style RC211V style seat cowling and includes all parts needed to do the conversion. This kit gives a roomier riding position and enhanced modern looks over the stock bike.
This product is suitable for the NC30 and is the race version without the street gear. We also offer two street versions of the same product which also include an LED Tailight and a registration/license plate holder.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0028
SKU: hon-10066 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30