Carbon front fender (GRP), HRC NSR250 replica
€200.13
Front Fender, Carbon, HRC NSR250 replica
This front fender follows the design of the type used on factory 250 cc GP World Championship NSR250s from 1992 through to 1995 and is not suitable for the MC18/21/28 street bikes with the same NSR250 name. We managed to source one of these factory front ends and needed a fender to suit so this is why we have the design. There is probably very little demand for this model but just in case someone wants to use it on their special etc, we offer it as part of our product range.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc
TYGA no: BPCF-0007
SKU: hon-10943 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopUpper Stay, TYGA Eyes, KTM RC125/200/250/390
€214.08
Upper Stay, TYGA Eyes, KTM RC125/200/250/390
Replacement upper stay should be used on Upper Cowling, KTM RC Series BPFU-7231(p) and BPCU-7231(p)
TYGA no: TYLY-0172
SKU: ktm-10103 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, RC 125/200, RC 390Throttle Cable, Close, Ninja 250R 2008 -12
€12.40
Throttle Cable, Close, Ninja 250R 2008 -12
TYGA no: 54012-0294
SKU: kaw-10208 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon rear seat, Aprilia RS250
€773.53
This seat cowling is to be used in our Aprilia RS-250 kits, BPFS-1102.
This product is compatible with Sub frame TYLY-0065. Will not fit stock Aprilia subframe
TYGA no: BPCT-9030
SKU: apr-10071 Categories: ALL products, Aprilia, Bodykit replacement parts, Carbon, RS250, ShopSeat set with carbon race, Honda NSR250 MC28
€539.26
This set of bodywork is designed to replace the stock seat cowling with the street version of our GP Race Seat cowling and includes all parts needed to do the conversion. The kit comprises the parts below which are also available separately.
We make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. . For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessary parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– Design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
TYGA no: BPFS-0006
SKU: hon-10240 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, By model, Honda, NSR250 MC28, ShopHEL front brake line Brembo 84mm, Honda MSX125 GROM
€76.14
Kit includes:
1x HEL Brake Line
4x Sealing Washer
1x M10x1.25 Banjo Bolt
1x M10x1.00 Banjo Bolt
45 degree banjo goes to master cylinder. 30 degree banjo goes to caliper.
Ensure Bleed nipple is at top of caliper for simple bleeding.
Route the hose through the standard brake hose retaining clips
Brembo caliper uses M10x1.00 banjo bolt. Not the same as standard Honda bolt.
TYGA no: BLSF-0010Â
SKU: MSX-10130 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsPassenger seat cover Black/flad black, Honda MSX125 GROM
€187.90
Passenger Seat Cover, (GRP), MSX125 Grom.
This is the GRP version of our MSX125 passenger seat cowling in asteroid black with flat black number board as shown in the main photo. Easy installation, with mounting hardware and trim supplied, this stylish cover will clean up the lines of your bike and make your bike stand out from the crowd.
This seat cowling is also available as BPCX-7128 in carbon fibre. See website for more details.
<a href= {{media url= wysiwyg/02-fitting-manual-seat-cover-bpfx-cx-7128-online-72148956.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFX-7128 B/F
SKU: MSX-10147 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopUpper Cowling (GRP), NX5 RS250R (1995 NSR250 Style)
€303.70
Upper Cowling Race, (GRP) NX5 RS250R (1993 Style) (BPFU-9236)
The upper fairing is modelled from the first version of the NX5 which has the side air intake. We made it slightly different by smoothing the left side where there is normally a cut out near the steering damper but is otherwise stock shaped. Made from high quality epoxy resin and 200 gram glass fabric, this product is both light and strong. It will tend to flex and not shatter in the event of an accident and hold up well to minor crashes. It is finished in primer ready for paint. To be used with lower cowling BPFL-9136.
Requires screen SCRE-0173
TYGA no: BPFU-9336
SKU: hon-10982 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, Shop