Side Cowling, Right, Race, Carbon Clearcoated, KTM RC390 WSS300
€454.95
Side Cowling, Right, Race, Carbon Clearcoated KTM RC390 WSS300
Replacement Side Cowling, Left, GRP, Race, WSS300, MUST be used with KTM WSS300 hardware
see also:
BPFU-7331R (GRP)
BPCU-7331UR (Carbon Unpolished)
Complete Bodykit set Type 10 Red, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 10, 2015 Valentine Red Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028Y
SKU: MSX-10310 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopPillion seat cover “carbon”, KTM RC390 2022 –
€177.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7731
SKU: ktm-10209 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsHandlebar set 50 mm, black
€230.31
Designed and machined in house from aircraft grade aluminium, suitable for most sports bikes with 50mm. inverted front suspension. See application chart below.
7 degree angle for a comfortable, yet sporty feel.
Ducati 750/900SS
Ducati Monster, Pre 2010
Honda CBR1000RR 2004
Honda CBR929/954
Honda RC45
Honda RC51 2000-05
Honda RS250 NF5/NX5 USD
Honda RVF400 NC35
Kawasaki ZX10R 2004
Kawasaki ZX14R All
Kawasaki ZX6/RR/636 2003
Suzuki GSXR1000 2001
Suzuki GSXR1100 95-98
Suzuki GSXR1300 All
Suzuki GSXR600 2004
Suzuki GSXR600 92-93
Suzuki GSXR600 94-96
Suzuki GSXR750 1993
Suzuki RGV250 VJ22/23
Suzuki TL1000R
Suzuki TL1000S
Yamaha R1 1998
Yamaha R6 2005
Yamaha YZF750 94-97
Please note that these bars may have clearance issues with components when used on street bike and are primarily sold for race use.
TYGA no: TYLY-1078
SKU: alg-10089 Categories: ALL products, Aprilia, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR900RR 1992- 95, CNC parts, CNC parts, CNC parts, CNC parts, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Kawasaki, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, VTR1000Sp1SP2, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, ZX10R 2011 -15Cover, Lower Left, GRP, Glossy Black, Assy, VFR750 3rd Gen, 90-93
€122.86
Set, pipe full race system round carbon/carbon end cap silencer RH exit, VFR750F gen 4, 94-97
This TYGA Full Race System has been designed with no compromises and maximum power in mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits the 1994-1997 Generation 4 VFR750.
For unsurpassed looks, sound and performance, this system comes with the 450mm Round Auluminium Silencer but can be used with a number of our 2″ slip on exhaust silencers
See also our other sets with silencer included:
EXPS-0132 Set, Pipe, R.H Exit, Full Race System, Round Aluminium Silencer
EXPS-0133 Set, Pipe, R.H Exit, Full Race System, Round Carbon/Carbon End Cap Silencer
EXPS-0135 Set, Pipe, R.H Exit, Full Race System, Round Carbon Silencer
EXPS-0136 Set, Pipe, R.H Exit, Full Race System, Oval Stainless Silencer
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing in at only 4.15 kgs (not including the silencer).
**Important Note**
The TYGA system keeps the use of the side stand and pillion foot rests however, the centre stand must be removed prior to installation.
TYGA no: BPFX-7049
SKU: hon-11336 Categories: ALL products, Exhausts, Honda, Shop, VFR750F Gen 3 90-93Triple clamp set CNC black, Honda RVF400 -> CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC35
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1742
SKU: hon-10555 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, ShopTYGA bike dust cover two tone blue/black RACE , universal
€65.05
TYGA Performance Indoor Bike Dust Cover, Blue/Black (Race)
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for race bike or motorcycle with no rearview mirrors fitted from 125cc to modern 1000cc. supersports, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
Please contact us for your special requirements for custom-made dust covers or custom screen printing. Minimum order quantities ap
TYGA no: TMER-0054
SKU: alg-10271 Categories: ALL products, Aprilia, Bike covers, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, GSX-R1000 K5-K6, GSX-R1000 K7-K8, GSX-R1000 K9-K10, GSX-R1300 Hayabusa, GSX-R1400 Hayabusa, GSX-R600/750 K6-K7, GSX-R600/750 K8-K10, Honda, Merchandise, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, RSV125, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30, VTR1000Sp1SP2, Yamaha, YZ250 2005-15, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R125 2009-, YZF-R25/R3Side cowling A right (GRP), KTM RC125/RC200/RC390
€150.56
Side Cowling A, Right, Race (GRP), KTM RC125/200/390
This lightweight GRP side cowling replaces the heavier stock plastic item. Ideal for racing.
Must be used with:
BPFX-7331R TYGA Performance Side Cowling B, Right, Race (GRP), KTM RC125/200/390.
or
BPCX-7331R TYGA Performance Side Cowling B, Right, Race (Carbon), KTM RC125/200/390.
Our fairing has the same shape as the original KTM side cowlings, but we have made some updates on the product which makes it stronger and easier to instal.
The TYGA side cowling work together as a set, the original KTM fairing won’t fit the TYGA and vice versa.
When you want to order make sure you order A B.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFX-7231R
SKU: ktm-10047 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390, Shop