Carbon exhauststay right, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for VJ22 RGV250. This product is used to secure the right side silencer for all types of TYGA exhaust systems for the VJ22 . It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes.
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0010
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012R
SKU: suz-10005 Categories: ALL products, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki, Various partsClamp, Silencer, Single, 90 mm., Assy.
€25.21
Stainless steel clamp. 90 mm. internal diameter with rubber protection for a firm, but friendly grip on your silencer. Includes mounting bolt, nut and washer.
Compatible with Silencers EXSL-0024 and EXSL-0025.
TYGA / Kitaco Power up kit stainless , Honda MSX125 GROM
€741.04 €666.94
TYGA/KITACO Power Up Kit, Stainless Type
This power up kit is designed to give a significant power boost over stock. Using TYGA Performance and KITACO products, the power of the MSX125 Grom is increased by 25%. Below is the dyno graph. STD vs our full system with carbon silencer, Kitaco type 2 camshaft, i-map (setting #3). Similar results were found with the Moto Maggot and stainess type silencers.
Parts
This product consists of the components shown below, namely:
EXPS-0052 Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap
KIT-300-1432010 KITACO Type 2 Camshaft
KIT-763-1432010 KITACO i-Map. Fuel Injection Controller
For those who want a Type 1 camshaft, please put this in the commentbox at check out.
Option:
KIT-763-0500900 i-Map interface cable. To adjust the i-map for special setting. Software available on KITACO website.
Description:
Fitting this Power Up Kit to your Honda MSX125/GROM gives a significant increase in top end performance and over rev. Peak hp is moved from 7,000rpm (std) up to 8,000rpm, with a 1.6hp gain at peak.
Fitting the i-Map Fuel Injection Controller is a necessary modification to avoid the engine running lean and being damaged. Running the KITACO Type 2 camshaft without the i-Map is NOT an option!
The wire harness requires modification and the documents are included with the kit, or can be viewed here: http://www.kitaco.co.jp/data/product/link/instaling_manual/kitaco_installing_manual_grom_imap.html
The i-Map is shipped with “setting #3” activated. This is the basic map for this kit, but the map can be modified using the optional i-Map interface cable and software downloadable from the KITACO website:
i-Map Fuel Manager: http://www.kitaco.co.jp/dlservice.html
TYGA no: TPER-0096
SKU: MSX-10304 Categories: ALL products, Exhausts, Exhausts, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopSet full race system with stainless silencers with carbon cap, Kawazaki Z125 2016-
€536.29
Set, Pipe, Full Race System, Kawa Z125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Z125 to maximise performance and looks. The header section has a special bulge to reduce the sound level, without sacrificing power. Complete with Lambda boss for 100% compatability with the stock electronics.
The final silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Performance and Dynograph
The green trace shows the 100% standard Kawasaki Z125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0063)
A useful gain all through the range, with potential for other engine mods.
Kawasaki Z125 Sound Level Test
Test Method: SAE J2825 Static sound level test for motorcycles
Equipment: DIGICON IEC-651 TYPE II sound meter
RPM TYGA System – No DBK TYGA System – DBK Installed OEM System
Idle 82 73 69
4000 92 84 81
5000 93 85 86
6000 95 87 91
TYGA no: EXPS-0063
SKU: kaw-10055 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Shop, Z125 2016-Carbon heel guards curved right , universal
€44.37
Right side carbon fibre heel guard. This heel guard curves inboard more than BPCC-9010R
TYGA no: BPCC-9210R
SKU: alg-10274 Categories: ALL products, By model, By product, Carbon, Honda, NSR125 JC22 1994 - 2003, NSR150SP, RS250R NF5 / NX5, Shop, Various partsKit complete body kit “street” with front fender GRP RC30 style, Honda VFR400 NC30
€1,073.55
This is the all GRP seat cowling used in the NC30 RC211V style seat cowling kits, BPFS-0028 and BPFS-0034.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC30.
To be used with:
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
registration/license plate holder BPCX-9007
TYGA no: BPFS-0228
SKU: hon-11429 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, Shop, VFR400RR NC30Carbon engine cover (right),(5 speed engine) Monkey 2022-
€93.94
TYGA no: BPCC-7542
SKU: msx-10516 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, Monkey 125 2018-, MSX125 2021-, ShopHandlebar Clamp, Right, Black, 41 mm.
€93.45
Replacement Right handlebar clamp for handlebar set TYLY-1077