Crankshaft seal, centre MC16 and MC18 (R2J/R4J)
€111.57
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TPER-5007
SKU: hon-11431 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18Lower Cowling, Race, GRP, KTM RC390 WSS300
€221.45
Lower Cowling, Race, GRP, KTM RC390 WSS300
Replacement Lower Cowling. WSS300, MUST be used with KTM WSS300 hardware
see also:
BPCL-7531U (Carbon Unpolished)
BPCL-7531 (Carbon Clearcoated)
Gear 4th driven z=23 no.16, RGV250/RS250
€104.93
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Exhaust Chamber, Right, GP Type, Stainless Steel, Aprilia RS-250
€281.46
Bare replacement right side chamber for EXCS-0008
Aluminium wheel spacer kit orange, KTM Duke – RC125/RC200/RC390
€116.96
Wheel, Aluminium Spacer, Bearing, and Seal Kit, (Orange) KTM RC and Duke Series
This comprehensive kit is specifically designed for the KTM racer in mind. The wheel spacers have been cleverly designed to be captured in the seals (instead of being loose as they are with stock set up), enabling quick and easy wheel removal and installation; essential when every minute counts to get out in time for a session or race.
In addition, the spacers are all made out of high quality aluminium (6061-T6) instead of steel giving a useful saving of 65% in important unsprung weight.
Finally, we provide a complete set of high quality Japanese Koyo wheel bearings to replace the not so good ones supplied from the factory.
All in all, a useful and inexpensive upgrade. Now you really are ready to race!
Included in this kit are the following components:
Bearings
front wheel x 2
rear wheel x 2
sprocket carrier x 2
seals
front wheel x 2
rear wheel x 2
spacers
front wheel, left, right and centre
rear wheel, left, right, centre and sprocket carrier
Note: We also offer a similar product in silver and kits for the wheel spacers only.
TYGA no: TPER-0003ORANGE
SKU: ktm-10078 Categories: ALL products, CNC parts, CNC parts, CNC parts, Duke 125/200 2012- 16, Duke 125/200 2017 -, Duke 390 2012-16, Duke 390 2017 -, RC 125/200, RC 390Carbon tail light surround gloss, Honda NSR250
€110.40
Taillight Surround (Carbon), NSR250 MC21, Gloss
This carbon taillight surround replaces the stock plastic part and is easy to install to give your bike a fresh and individual appearance.
Note, TYGA decal peels off if not required.
TYGA no: BPCX-0003g
SKU: hon-10571 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250 MC21, ShopLower Triple Clamp, CNC Black, RVF400R Forks / NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, VFR400R Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the Honda VFR400R/NC30 to take RVF400/NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1644 Triple Clamp Set, CNC Black,RVF400/NC35 forks to fit RVF400R/NC30.
Triple clamp set CNC black, Honda NSR250 MC28 to fit CBR600 fork
€602.26
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC28
CNC machined TYGA lower triple clamp for the MC28 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ingnition switch/ lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1941
SKU: hon-10558 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28, Shop