Set full race system with stainless silencer with carbon cap, Honda MSX125 GROM
€480.85
Set, Pipe, Full Race System, MSX125 Grom, Stainless Oval/Carbon End Cap, First Generation
This full race system has been specifically designed for the MSX125 to maximise performance and looks.The silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042).
A useful gain all through the range, increasing as the revs rise up to maximum.
The silencer was full bore. No decibel killer used.
Similar Products:
Please also see:
EXPS-0042 Moto Maggot System
EXPS-0041 Carbon Oval Silencer System
EXPS-0067 Stainless Oval High level System for 2016 MSX125SF second generation Grom
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
TYGA no: EXPS-0052Â
SKU: MSX-10277 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopSide fairing right RC211V, NC30 NC35
€110.40
This a replacement part for bodywork sets BPFS-0012* , BPFS-0013, BPFS-0014, BPFS-0032, BPFS-0033. This part renamed from BPFU-9118R
*fits later model BPFS-0012, earlier BPFS uses another parts. If in doubt email us first before ordering
TYGA no: BPFU-9120R
SKU: hon-10095 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, VFR400RR NC30Sprocket holder CNC silver, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-1043
SKU: hon-10394 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopTYGA step kit replacement link rod 205mm, Y
€16.07
Tyga Step Kit Replacement Link Rod, Male, 205 mm.
Replacement gear link rod for your TYGA Step Kit. (Check application before ordering)
Uses M6x1 thread in one end and M6x1 L/H thread in the other, and includes both the nuts. 205 mm. in length.
TYGA no: STAR-0006
SKU: yam-10054 Categories: ALL products, CNC parts, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all models, Yamaha, YZF-R25/R3Set pipe Stainless full race system “no silencer”, Kawasaki ZXR400L
€644.67
Set, Pipe, Stainless, Full Race System (No Silencer), ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
In this set NO silencer is included please see EXPS-0138, EXPS-0139 and EXPS-0140 for systems with silencer
Kitaco reinforced cam chain tensioner, Honda MSX125 / grom
€95.40
Kitaco reinforced cam chain tensioner, Honda MSX125 / grom
High performance with high quality and durability.
Specially designed for the Honda MSX125 with big bore kits.
Light and strong CNC aluminium with a special coating. Better performance and reliability.
TYGA no: 303-1432810
SKU: MSX-10381 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit blackSeat set race GP-T, Honda NSR250 MC18
€998.82
Kit, Seat Set, GRP (Race), MC18 GP-T
This set of bodywork is designed to replace the stock seat cowling with the race version of our GP-T Race Seat cowling and includes all parts needed to do the conversion. It is suitable for the MC18.
‘Note this kit has been designed primarily for the 1989 model but will also fit the 1988. Note that for the 1988 model, the exhaust stays are suitable for our TYGA exhaust system but not the stock exhausts. The wiring harness differs on the 1988 model so there may be some modification of the wiring harness required.’
The kit comprises parts shown below which are also available separately.
Note there are 3 MC18 GP-T seat cowling kits to choose from:
BPFS-0160 Street GRP
BPFS-0161 Race GRP
BPFS-0162 Street Carbon
TYGA no: BPFS-0161
SKU: hon-10629 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC18, ShopExhaust set stainless steel, Aprilia RS125
€355.59
.Set, Exhaust Chamber, Stainless Steel, Aprilia RS-125
Cone welded stainless steel exhaust, for your RS125 performance and look!
The TYGA Performance Aprilia RS-125 Stainless Steel chamber, when used with a TYGA silencer, offers huge saving in weight and increase in power over the stock system. The handcrafted cones are TIG welded together to show the weld rings to maximum affect; this system is a must for the Aprilia RS-125 owner and fits all versions up to and including 2011
This products is the chamber set only and to complete the full replacement exhaust system for your Aprilia RS125 you will need to order a silencer too.
Included in this product:
A.)1 X chamber set (EXCS-0013 or EXCS-0019). When you order this product, you will receive included in the chamber set:
1 X chamber
1 X manifolds with flange and ‘o’ring
2 X manifold to chamber springs
1 X clamp and mounting hardware
Not included in this product is the silencer. Please order separately:
B.)1 X silencer (EXSL-0003, EXSL-0004 OR EXSL-0005) of your choice. Each silencer is provided with mounting hardware and will have a badge attached on the correct side for this system when ordered at the same time.
As is the case with any power upgrade, it is important that you make adjustments to the carburation as necessary. The dyno graph shown had the jetting adjusted one size leaner on the main jet and one clip richer on the needle for optimum performance. However, you will need to adjust your bike’s settings according to your ambient condition. If in doubt, start with a rich setting across the range, and lean off as required. Failure to correctly set up the carburation could result in engine damage.
TYGA no: EXCS-0019Â
SKU: apr-10002 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Exhausts, Exhausts, RS125, Shop