Exhaustset race Stainless steel motogp Silencer open, NC30 NC35
€1,035.91
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0011
SKU: hon-10101 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Kit, Fairing Set, Race, GRP, Stock Shape, VJ21
€700.54
Kit, Fairing Set, Race, GRP, Stock Shape, VJ21
Complete set of stock shaped bodywork for the Suzuki RGV250 VJ21
Consists of the following products ( also available seperatly)
BPFU-1019 Upper Fairing
BPFL-0019 Lower Fairing
BPFT-1019 Seat Cowling
BPFF-0019 Front Fender
SCRE-0120 Clear Screen
TYGA no: BPFS-0192
SKU: suz-10119 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Screen stock, Honda NSR250 MC21
€52.00
Screen stock, Honda NSR250 MC21
This screen fits the original bodywork
TYGA no: SCRE-0016- SCRE-0017
SKU: hon-10345-hon-10346 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250 MC21Triple Clamp Set, CNC Black, NSR250, MC28
€619.36
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform! They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation.
The top clamp has the ‘bolt-on’ ignition switch holder fitted, which can be removed for racing. The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1641
SKU: hon-10872 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250, NSR250 MC28Gasket exhaust, Honda VFR400 NC30 / RVF400 NC35
€3.92
Compatible with:
With NC30/35 exhaust systems including TYGA systems (included in set EXPS-****). Suitable for most Honda four stroke systems.
TYGA no: 18291-MN5-650
SKU: hon-10503 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Honda, RVF400RR NC35, Shop, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97Triple clamp set CNC silver, Suzuki SV650
€573.36
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
Harness, Lambda, Ninja 250/300 2013-
€17.42
Harness, Lambda, Ninja 250/300 2013-
This is an extension to allow the lambda sensor to be plugged into the stock wiring harness from its position on the right of the bike. (The stock exhaust runs up the left side and the harness is too short without this extension)
Section, Final, Stainless, Ninja 250R
€194.35
Final section. Used on EXPS-0014, EXPS-0015, EXPS-0016, EXPS-0017 and EXPS-0018.
TYGA no: EXPT-0011
SKU: kaw-10105 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, Shop