Lower Cowling, GRP, Stock Shape, VJ21
€200.66
Lower Cowling, GRP, Stock Shape, VJ21s
TYGA no: BPFL-0019
SKU: suz-10125 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Section, Header, Rear Right, Stainless, NC30/35
€135.29
Header, Rear Right. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-3002
SKU: hon-10848 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsUpper Cowling (Street GRP), VJ21, Stock Shape
€149.04
Upper Cowling (Street GRP), VJ21, Stock Shape
Replacement of original.
TYGA no: BPFU-0019
SKU: suz-10107 Categories: ALL products, Bodywork, Bodywork and carbon, RGV250 VJ21, Suzuki, Suzuki RGV250Seat set race, aluminium subframe, Suzuki RGV 250
€698.64
One of our most popular TYGA bodykits from last years.
Designed for the Suzuki RGV250, but used on many bikes all over the world.
This set of bodywork comprises the parts shown in the picture which are also available separately.
It is supplied with all additional fasteners required to mount it to a stock VJ22.
If you have left and right exiting chambers (side by side) you will need to add 1 X TYLY-0029 to your order (Only one supplied in kit for twin right exiting chambers)
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-1037
SKU: suz-10212 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiSet full race system with moto maggot silencer, Honda MSX125 GROM
€409.54
Set, Pipe, Full Race System, MSX125 Grom, Moto Maggot. First Generation
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042). Similar results would be expected with the Maggot.
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0041 Carbon Oval Silencer System
EXPS-0052 Stainess Oval Silencer System
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0042
SKU: MSX-10133 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopAirbox Carbon/kevlar, Honda NSR250 MC21/MC28
€635.04
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007
TYGA no: BPCX-0007
SKU: hon-11071 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Bar end weight (pair), Honda RC36-2 RC30 style
€26.03
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYLY-0324
SKU: hon-11533 Categories: ALL products, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsHarness Extension, SC28 (94-95) Meter, Honda VFR750R RC36-2
€28.51
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYWH-0008
SKU: hon-11478 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist