Upper cowling (GRP) NX6, NSR500V
€299.78
Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame without Steering Damper)
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident.
Note that some examples of the VJ21 had no steering damper mounting boss. Also some other frames have the steering damper mounting boss in a different position. For those frames, ypou also can ise thsi set this set and cut a hole to suit.
See also Set: BPCC-7021 Frame Cover, Pair, Carbon, RGV250 VJ21 (Frame with Steering Damper)
Race airbox lid, Honda NSR250 MC21/MC28
€131.29
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
This is the budget version in GRP. For carbon version, please also check out BPCX-9010.
TYGA no: BPFX-9010
SKU: hon-10383 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCrankshaft, Honda NSR250 MC21/MC28
€1,010.86
Crankshaft, MC21/28
This is a new OEM Honda part, ready for installation.
TYGA no: 13000-KV3-950
SKU: hon-10504 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopKit, Bodywork, GRP, stock shape, NSR250 MC21, Painted Rothmans
€1,604.24
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Please note this product is only available for delivery in 7 days
TYGA no: BPFS-0205
SKU: hon-11280 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersSprocket holder CNC black, Honda NSR250 MC21
€198.07
CNC machined TYGA sprocket holder for your NSR250 MC21R/SE/SP.
Designed and machined in house by TYGA, as a direct replacement for the ugly and heavy standard MC21 sprocket holder.
Crafted from aircraft spec 6061-T6 alloy, and supplied with bearing, seals and alloy (6061-T6) spacer, the sprocket holder is ready to fit.
Not only is this part a major cosmetic improvement, but it is only 60% as heavy as the OEM part. This means less unsprung mass, and also less rotational mass. The best case scenario.
TYGA no: TYLY-0043
SKU: hon-10393 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, ShopNGK plugcab for sparkplug R7282 Blue
€67.95
NGK sparkplug cab for sparkplug R7282 Blue (alg-10228)
NGK spark plug cap TRS1225 with 5 kohm resistor for NGK short race spark plug R7282. Suitable for 8 mm spark plug cable. Can be used f.e. for Honda NSR250 / RS and Aprilia RS250 / Suzuku RGV250 Yamaha TZ 125 and 250 road race engines.
You also need product alg-10227, picture below is a complete set.
TYGA no: TRS1225
SKU: alg-10228 Categories: ALL products, Aprilia, High performance, High performance, High performance, High performance, High performance, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RS250, ShopTYGA bike dust cover Red Honda wing white
€65.05
TYGA Bike Dust Cover, Blue, Rothmans Honda
This cover is handmade from 100% breathable polyester and ideal for an indoor dust cover. Suitable for sports bikes from 125cc to modern 1000cc. sportsbike, the cover features a pull-string around the bottom to secure it in position, comes with its own storage pouch and is machine washable.
Note, this is for indoor use only. For a weatherproof cover, see 08P34-KPP-700 Honda Bike Cover.
TYGA no: TMER-0155
SKU: hon-11299 Categories: ALL products, Bike covers, By model, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R 2011 - 15, CBR250R MC19, CBR250RR 2017, CBR250RR MC22, CBR300R 2014-, CBR400RR NC23, CBR400RR NC29, CBR500R, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, Merchandise, NSR150SP, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, NSR500V, NSR500V NX6, RC36-2 -> RC30 replica products, RS250R NF5 / NX5, RVF400RR NC35, RVF750 RC45, Shop, Universal parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2Disc Brake, Front, Ninja 250R/300R 2013 -18
€302.52
Disc Brake, Front, Ninja 250R/300R 2013 -18
TYGA no: 41080-0578-11H
SKU: kaw-10181 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, Shop