Carbon trim set, Honda MSX125SF GROM
€120.70
Trim, Set, (Carbon) MSX125SF
Carbon trim set to decorate your MSX125 Grom. Precision molded, these fit over the stock plastic stock items and transforms the appearance of your bike. Install with double sided tape provided or with silicone sealant for a really permanent installation.
TYGA no: BPFS-7328
SKU: MSX-10395 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MSX125 GROM, MSX125SF 2016 -2020Seat cowling (GRP), stock shape race, Honda VFR750 RC30
€386.36
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Upper Fairing, Street, (GRP) KTM RC125/200/250/390
€180.64
Upper Fairing, Street, (GRP) KTM RC125/200/250/390
Replacement Upper Fairing for complete kit see: BPFS-0170 and BPFS-0171
TYGA no: BPFU-7231(p)
SKU: ktm-10107 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, KTM, RC 125/200, RC 390Needle roller bearings, set MC16 and MC18 (R2J/R4J)
€51.65
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TPER-5008
SKU: hon-11432 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18Triple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Silencer clamp single 60mm
€11.78
This single silencer clamp is specifically designed for TYGA expansion chambers for the Honda NSR150 and Aprilia RS125
Designed to securely clamp 60~61mm O.D. silencers.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0007
EXCS-0013
EXCS-0019
EXCS-0037
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0010
SKU: alg-10001 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, NSR125 JC22 1994 - 2003, NSR150SP, RS125, ShopCarbon fuel tank MK2, Aprilia RS250
€1,225.57
Carbon fuel tank MK1, Aprilia RS250
Top quality reproduction of the Aprilia RS250 MK1 fuel tank.
Finished in high quality UV resistant clear-coat to show off the beauty of the carbon weave.
For the construction of this tank, all the innovation and technology were used, it’s made with a particular technique that allows us to use a single piece of carbon with significant aesthetic and structural advantages The internally there are several layers of Kevlar to increase impact resistance.
The internal surface is treated with a special coating made to our specifications to ensure the seal over time. The air vent is in anodized and made and design in house.
And as a finishing touch, the carbon frame bracket is also supplied with titanium fixing screws.
Not included:
– fuel cock
– stock mounting rubbers
– filler cap and seal
TYGA no: 0049TYGA
SKU: apr-10111 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopTriple clamp set CNC silver, Suzuki SV650
€573.36
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.