Carbon Air duct “satin” (pair), NC35
€308.36
These real carbon air ducts are a direct replacement for the cheap and nasty plastic ones the bike is supplied with. Fits in a few minutes and makes a dramatic improvement to the overall appearance of the bike.
TYGA no: BPCX-0018satin
SKU: hon-11444 Categories: ALL products, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, ShopExhaustset race Stainless steel motogp Silencer open, NC30 NC35
€1,035.91
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0013.
This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0011
SKU: hon-10101 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carbon radiator bracket MK2, Aprilia RS250
€61.22
Carbon radiator bracket MK2, Aprilia RS250 (apr-10081)
Nice carbon part, better looks for your bike and good replacement for that heavy steel one
TYGA no: 004704KT/P
SKU: apr-10081 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopSpeedo Cable, Ninja 250R 2008 -12
€15.41
Speedo Cable, Ninja 250R 2008 -12
TYGA no: 54001-0014
SKU: kaw-10210 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopCarbon front fender rsw style, Honda MC18/MC19/MC21/MC22/MC28
€180.80
This is the carbon version of our RSW front fender for enhanced looks, strength and light weight. Gives the appearance of a modern front end with inverted forks and fits using the original fasteners. This front fender is suitable for many Honda sports bike models such as:
all model NSR250s, MC18~28
MC19 and MC22 CBR250RR
CB400SF Super Four
Honda Bros/Hawk 400/650. (needs 110/70 section tyre fitted)
This product will not fit the NC23, NC29 CBR400RR, NC30. For these models, use BPCF-9002, for NC35, use BPCF-9005
TYGA no: BPCF-9001
SKU: hon-10204 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, CBR250R MC19, CBR250RR MC22, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopMeter Stay Extension
€12.29
Replacement meter stay extension nylon shaft. Suitable for the following models:
BPFS-0012
BPFS-0019
BPFS-0032
BPFS-0033
See table for application of meter stay extensions with our body kits:
Carbon tankcover front, 696/795/796/1100
€130.44
Tank Cover, Front, (Carbon), Ducati Monster
Seat Panel, Left, Ebony, Ninja 250R 2008 -12
€55.10
Seat Panel, Left, Ebony, Ninja 250R 2008 -12
TYGA no: 36040-0114-H8
SKU: kaw-10201 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, Shop