Rear sprocket aluminium gold, ZXR250/300 GSX600/750/1000 R6/R1/R25/R3
€67.41
Upgrade your bike with TYGA Sprockets.
Designed and machined in house from super strong 7075 T6 aluminium, and then anodized in gold colour for superior corrosion and abrasion resistance.
TYGA no: TYSR-0103-42TÂ - TYSR-0103-47TÂ
SKU: alg-10156 - alg-10161 Categories: ALL products, By product, Kawasaki, Ninja 250R 2008- 12, Ninja 250R/300R 2013 -, Ninja 400R 2018-, Sprockets, Various parts, Yamaha, YZF-1000 R1 2002- 6, YZF-1000 R1 2007- 8, YZF-1000 R1 2009- 14, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12, YZF-R25/R3Section, Final, Slip-On type, Stainless, Ninja 250R
€67.51
Final Section. Used with stock headers and EXPS-0034
Carbon cover, temp Gauge 64mm, Honda
€25.10
Carbon cover, temp Gauge 64mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC18 NSR250
NC30 VFR400R
RC30 VFR750R
Also available as a complete set with speedo,temp gauge and rev counter, see BPCC-0027
This product might also fit other models.
TYGA no: BPCC-0024
SKU: hon-10609 Categories: ALL products, Carbon, CBR400RR NC23, Honda, NSR250 MC18, Shop, Various parts, Various parts, VFR400RR NC30Stay oval silencer, Honda MSX125SF GROM
€20.41
Stay, Silencer, High Level Exhaust, MSX125
This product allows for the use of a TYGA Performance high level full race system with the 2016 second generation MSX125SF Grom. Some small modification to the rear fender is required to allow for installation, but once installed, the stay is neat and tidy and unobtrusive. This product is suitable for, and included with, the following model exhausts:
EXPS-0066 Set, Pipe, Full Race system, MSX125SF Grom, Carbon Oval/Carbon End Cap
EXPS-0067 Set, Pipe, Full Race system, MSX125SF Grom, Stainless Oval/Carbon End Cap
Note: This product can be ordered individually and used for customizing your bike with any high level exhaust. See also similar product BPSY-0175 which has the mounting holes further forward and is used with our Maggot full race system EXPS-0065.
TYGA no: BPSY-0177
SKU: MSX-10341 Categories: ALL products, Exhausts, Honda, MSX125SF 2016 -2020, ShopSet full race system under belly with long stainless silencer + carbon side cover, Honda Monkey 125 2018- BP5624
€731.40
Set, Pipe, Full System, Underbelly, Monkey 125, Stainless Oval/Carbon End Cap, Long, with Carbon Side Cover
This full race system has been specifically designed for the Monkey 125 to maximise power. Made in stainless steel with spring mounted stainless silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too! (A dB killer is included).
Note that once the stock system has been removed from the Monkey, there is an empty space under the seat on the right side. This set includes Carbon Side Cover BPCC-7142R which has been designed to mirror the left side cover. This will fill in the gap under the seat and complete the transformation. Refer to photos of the exhaust installed for more details.
Performance and Dynograph
The blue trace shows the 100% standard Honda Monkey 125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0107) with no other changes to the stock bike.
A useful increase in peak power and further gains could probably be had with remapping etc.
Similar Products:
Please also see:
EXPS-0108 Stainless, Underbelly, with short silencer
Carbon sprocket cover, Aprilia RS250
€115.38
Sprocket Cover (Carbon), Aprilia RS-250
Attractive alternative to the stock sprocket cover and uses original mounting bolts.
TYGA no: BPCC-7217
SKU: apr-10075 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, RS250, ShopTriple clamp set CNC Silver, Honda VFR400
€673.59
CNC machined TYGA triple clamp set for your VFR400R/NC30.
These stylish, all aluminium triple clamps are a direct replacement for theVFR400R/NC30, and with the help of FEA testing not only do they look fantastic, but they perform!
They are delivered ready to fit with all bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0244
SKU: hon-10621 Categories: ALL products, CNC parts, CNC parts, Honda, Shop, VFR400RR NC30Set exhaust chamber “mini” titanium.
€239.95
Set, Exhaust Chamber, Mini, Titanium
This miniature titanium chamber encapsulates the spirit of the two stroke enthusiast. Taper coned, these all titanium chambers are hand rolled and welded one by one by our expert welders, the very same method by the very same craftsmen who fabricate our full sized chambers for road and racing machines.
In fact each miniature chamber takes almost the same time to make an actual full sized one! This limited production piece is supplied with its very own real carbon fiber display stand to make it really stand out and look special.
Makes a great gift or talking point among visitors to your office or man cave!
* Not to be confused with a real motorcycle exhaust chamber, for decoration purposes only, though in theory it will work!
TYGA no: EXCS-0048
SKU: alg-10365 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, Shop