Tank filler cap racing , Suzuki 4 hole
€69.87
Tank Filler Cap, Keyless, Racing Type, Suzuki 4 Hole
This keyless racing fuel tank filler cap is CNC machined from billet aluminium and anodised black with a laser etched TYGA logo. Designed with finger tabs for easy removal while wearing gloves
Supplied complete with seals and mounting hardware, it can be installed in minutes. This product is suitable for Suzuki sportsbike models which have 4 bolt mounting arrangement. See also the 3 hole model we supply (If in doubt, remove your existing filler cap to see which bolts actually mount to the tank and which ones are dummy ones for the outer ring only). Suitable for the following models:
- RGV250 VJ21, VJ22 and VJ23
- GSXR600 (1997 – 2003)
- GSXR750 (1996 – 2003)
- GSXR1000 (2001 – 2002)
- GSXR1300 (1999 – 2007)
- GSX600F (1998 – 2001)
- GS600F (2000 – 2001)
- GSF1200/Bandit 1200 (2001 – 2004)
- SV650 (1999 – 2002)
- TL1000S/R (All Years)
See also Suzuki 3 hole pattern
TYGA no: TYLY-0112
SKU: alg-10192 Categories: ALL products, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, Shop, Suzuki, Suzuki RGV250, Tank fillers, Various parts, Various partsRacing step kit CNC silver, Honda CBR900 SC28
€362.52
Designed and built in-house by TYGA Performance using CAD/CAM software, these CNC machine- made step kits are manufactured from top grade aluminium. Uses carbon heel guards on both sides.
This step kit moves the peg position back 10 mm. and up 25 mm. from standard. Pitch of hanger to frame mounting holes is 79 mm.
TYGA no: STAA-0020
SKU: hon-10364 Categories: ALL products, CBR900RR 1992- 95, CNC parts, Honda, ShopTyga Step Kit Replacement Left Side Hanger, MSX125 Grom, Black, Assy.
€90.48
Replacement left hanger for your MSX125 Grom TYGA Step Kit, Black. Complete with mounting hardware and bushes.
Racing step kit CNC silver, Honda NSR250 MC18
€384.49
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using the latest CAD/CAM software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light provision.
Peg position is 20mm. up and 10mm. back. Pitch of hanger frame mounting holes is 78 mm. on left and 71.5 mm on right.
Reverse schifting is possible with this race step kit.
TYGA no: STAA-0016
SKU: hon-10366 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC18, ShopRacing stepkit adjustable (street), KTM RC390 2022-
€423.04
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: STAA-0037
SKU: ktm-10199 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsMirror blanking plate black, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Exhaust Chamber, Left, GP Type, Stainless Steel, RGV250, VJ22
€305.44
Bare replacement left side chamber for chamber set EXCS-0010L
Silencer carbon round (4 stroke) 2
€348.60
This silencer has polished stainless steel endcaps and a carbon fiber tube to produce an attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
TYGA no: EXSL-0012
SKU: alg-10029 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, RVF400RR NC35, Shop, Silencers, VFR400RR NC30