Front Fender white, Honda MSX125 GROM
€88.02
Front Fender MSX125 Grom, White
TYGA no: 61100-K26-900ZC
SKU: MSX-10099 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopKit, Complete Body Set, Stock Shape, Solo Seat, NC30, Painted Type 1
€1,513.93
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFS-0221
SKU: hon-11400 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Carbon tank filler cap cover Honda, CBR600 en CBR1000
€35.23
Carbon Tank Filler cap Cover. Fits most Honda sports bikes including:
MC18, MC21, MC22, MC28
NC23, NC29, NC30, NC35
Most other modern sports bikes such as CBR600, and CBR900, 1000 and 1100XX models
TYGA no: BPCC-0002
SKU: hon-10009 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30, VTR1000Sp1SP2Seal, Kickstart, MC28
€6.23
Seal, Kickstart, MC28
TYGA no: 91204-MC7-003
SKU: hon-11084 Categories: ALL products, High performance, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28Set pipe full race system WSS300 (no silencer), KTM Duke 390
€650.45
Set, Pipe, Race System, WSS300, No Silencer, KTM 390 Duke
This exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
Note, this is a system with NO silencer
For complete system with silencer please see EXPS-0142
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Breather cap, aluminium CNC, Honda RC30/NC30/MC18
€35.12
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
TYGA no: TPER-0112
SKU: hon-11446 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC18, RC36-2 -> RC30 replica products, Shop, Stocklist, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Sidehanger right TYGA, Honda RS250 NF5
€47.25
Tyga Step Kit Replacement Right Side Hanger, NF5 RS250R
Exact replica of the HRC part 50630-NF5-000, Holder, R. Step.
TYGA no: STAH-0052
SKU: hon-10548 Categories: ALL products, By model, By product, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopKitaco 181cc NEO 2v kit, Honda Grom 1st + 2nd gen.
€1,228.63
Kitaco 181cc NEO > 181cc big bore kit Kitaco for Honda MSX125 Grom 125.
High performance with high quality and durability.
This Kitaco kit with TYGA exhaust is good for 17 horsepower on the rear wheel.
Cylinder head shaped for better combustion and with high efficient port shape with bigger valve ( Ø30.0mm & Ø24.5mm valve, std are 25.5mm and 21mm).
Racing camshaft provided.
Hi compression piston 11.1:1.
Cylinder head shaped for better combustion and with high efficient port shape with bigger valve ( Ø30.0mm & Ø24.5mm valve, std are 25.5mm and 21mm).
Racing camshaft provided.
Hi compression piston 11.1:1.
Kit with:
-Complete cylinder head (with camshaft, spark plug,…)
-Cylinder with treatment Nicasil with high compression piston kit.
-Crankshaft with H-Rod (stock stroke).
-DID cam chain reinforced.
-Injector.
Attention: I-map and big throttle body kit are required.
TYGA no: 212-1432850 212-1432860
SKU: MSX-10368 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020 Tag: Honda MSX Kitaco NEO kit black