Crankshaft, Honda NSR250 MC21/MC28
€1,010.86
Crankshaft, MC21/28
This is a new OEM Honda part, ready for installation.
TYGA no: 13000-KV3-950
SKU: hon-10504 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopGear 2nd drive z=16 no.2, RGV250/RS250
€92.10
VHM insert, Aprilia RS125 (alg-10176)
piston height -0.35 mm, squish 0.90 mm. Most used is 12,0 cc.
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Section, Final, Slip-On type, Stainless, Ninja 250R
€67.51
Final Section. Used with stock headers and EXPS-0034
Carbon Seat set RVF, NC35
€912.34
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
This panel can also be ordered in kit BPFS-0066 complete carbon set NC35, street, and BPFS-0068 complete carbon set NC35, race.
TYGA no: BPCT-9004
SKU: hon-10139 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, RVF400RR NC35, Shoplower cowling (GRP), stock shape NSR250 MC21/MC28
€241.47
Lower Cowling (GRP), NSR250, MC21/28, Stock Shape, Assy
This part is a direct replacement for the OEM Honda left, right lower, right mid and inner cowls and has the ‘shark fin’ and front ducts retained. Compatible with stock and Tyga exhaust systems.
Compatible Parts:
Can be used with the following upper cowlings: MC21 and MC28 OEM upper cowling, Tyga upper cowlings: BPFU-0001, BPFU-0002, BPFU-0003, BPFU-0006, BPFU-0007, BPFU-0008 and BPFU-0022
See also
BPFL-0001 for similar product
TYGA no: BPFL-9001
SKU: hon-10915 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Carbon front chain guard, Suzuki RGV250
€56.86
Front Chain Guard, (Carbon), VJ22 RGV250
TYGA no: BPCC-0017
SKU: suz-10085 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiPower Up Kit, RGV250 VJ23
€2,635.46
VHM cylinder head (2 pieces), RGV250 / RS250 (alg-10092)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website, for use on the Suzuki RGV250, and also Aprilia RS250.
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design. Combustion chambers are available in different volumes.
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
Other options:
11.80
12.00 (standard)
12.20
12.40
12.60
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
Carbon bodykit complete MiniRacerXtreme, Honda MSX125SF GROM
€2,408.13
Bodywork Set, (Carbon), MRX, MSX125SF Second Generation Grom
This kit is the ultimate modification for your MSX125SF Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors.The panels are made from carbon fiber using high quality epoxy resins for strength and lightness and are finished in three layers of UV resistant clearcoat for a glossy finish. No need to paint; just assemble and ride away.. The shape lends itself to most liveries and ideal for promoting your business or race team.
With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125SF Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.
This body kit MUST be used with a high level exhaust because there is no space for the belly type in the fairing lower. We recommend the following exhaust systems:
EXPS-0065
EXPS-0066
EXPS-0067
Comes with a free MRX Bike Dust Cover
Note this kit is specific to the MSX125SF second generation Grom. For the first generation kit, please order BPFS-0127 and BPFS-0128
TYGA no: BPFS-0156
SKU: MSX-10390 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MRX, MSX125 GROM, MSX125SF 2016 -2020