Seat cowling with carbon assy, Honda NSR250 MC28
€363.28
We now make four versions of our NSR250 GP Race seat cowling for use in 8 different race and street sets. This product includes ONLY the seat cowling for replacement in the event of an accident or to use on a model other than the MC21 or MC28. For the MC21 and MC28, we recommend ordering one of the complete kits below (BPFS-****) which includes all the necessay parts to complete the modification.
BPFS-0003 (street)
BPFS-0004 (race)
uses BPFT-9002 MC21 with carbon front section
BPFS-0059 (street)
BPFS-0060 (race)
uses BPFT-9102 MC21 all GRP construction
BPFS-0004 (street)
BPFS-0005 (race)
uses BPFT-9012 MC28 with carbon front section
BPFS-0045 (street)
BPFS-0046 (race)
uses BPFT-9112 MC28 all GRP construction
The advantages of this seat cowling over stock include:
– new design allows for integrated LED Tail light ( BPLT-0008) for flush fitment and new lighter registration/license plate holder ( BPFX-9006). For race use, location for LED Tail light acts as air vent
– higher at the rear, to give the bike a more agressive stance
– better rider control by use of enclosed seat area
– improved strength with precision in design and fitment as well as lighter weight.
Tyga Performance Compatible Parts for this Product:
This product should be used with:
TYLY-0007 Subframe
TYLY-0006 Battery Box
BPSP-0001A Seat Pad
BPAC-0001 Rear Brake Reservoir Kit,
And also as well as the above on street versions:
BPLT-0008 LED Taillight
BPFX-9006 Registration Plate Holder
TYGA no: BPFT-9012Â
SKU: hon-10347 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250 MC28, ShopSilencer kevlar/carbon SHORTY 60mm 2 stroke
€156.20
This high quality shorty (55mm shorter than our other silencers) lightweight silencer (0.40kg) is made from CNC machined end caps joined by a Carbon/Kevlar fiber tube. It has a built-in sealing ‘O’ ring and is supplied with stainless steel bolts and washers for fitment.
Note this product is intended to be used with our exhaust chambers (EXCS-****) and is not a direct replacement part for the stock or other manufacturers’ silencers. If you wish to install our two stroke silencers with a stock chamber, we offer a mounting flange (code TPER-0052 and TPER-0022) in either stainless or mild steel which can be welded onto the existing chamber and suitable for directly bolting our two stroke silencers to an existing non TYGA chamber. The flange is of course not required if intended to install to a TYGA chamber.
Compatible Products:
All Tyga Performance Two Stroke chambers sets. Remember to order the correct number of silencers for a complete system!
Other Alternative Products:
EXSL-0065 Shorty Carbon
EXSL-0067 Shorty Aluminium
EXSL-9005 Aluminium
EXSL-0003 Carbon
EXSL-0004 Carbon/Kevlar
TYGA no: EXSL-0066
SKU: alg-10259 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, ShopSeat Lock, Universal, Assy
€23.44
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: TYTO-0047
SKU: hon-11522 Categories: ALL products, chassis & fittings, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon airducts (pair) satin , Honda CBR250 MC22
€317.07
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPCX-7110satin
SKU: hon-11463 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersTurn signal Set Front black, Honda RC30 style
€90.08
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: BPLT-0040
SKU: hon-11541 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, StocklistVHM Cyl. headset Yamaha YZ125 ’05-
€271.95 €256.04
VHM Cyl. headset Yamaha YZ125 ’05-> (alg-10202) AA33077VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.We are pleased that we can offer VHM products on our website.VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring designThis head set comes with following parts:1x cylinder head1x standard insert (11.00cc)Optional inserts:– blind– 10.80– 11.00– 11.20This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.Note: please put in comment box, the year of your bike and what size insert you want (no comment is STD insert).Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33077Â Â Â Â Â Â Â Â
SKU: alg-10202 Categories: ALL products, Motocross, Shop, VHM products, Yamaha, Yamaha MXUpper cowling street RVF, NC35
€284.65
Stock shaped GRP upper fairing, comprising the upper and two side inspection covers of the OEM plastic panels. Supplied with light holes and light fittings. Race version (BPFU-0009) also available.
Suitable with BPFL-0003 stock shaped lowers.
See also kits BPFS-0069 and BPFS-0070.
TYGA no: BPFU-0029
SKU: hon-10147 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopFairing set race stock with seat, Suzuki RGV 250
€756.46
Kit, Complete Body Set, (Race), VJ22, Stock Shape
This kit comprises of parts below.
Upper Fairing
Lower Fairing
Seat Fairing
Front Fender
Screen
The fairing is a race version of the stock shape with headlight and indicator holes filled in. The lower is in one piece for simple installation and removal.
Ideal for race classes where retaining stock shape (or similar) is necessary to comply with rules. The panels are top quality, being lightweight, flexible and tough. Constructed with epoxy resin and multi layer cross weave mat; do not confuse this with budget race glass made with polyester and chopped strand just because the price is right!
This kit is supplied with clear screen. Please state if you would like a tinted screen or and we will be happy to change to suit. Same applies if you wish to substitute a different model front fender.
Please note that the fairings only weigh approx. 1kg for upper fairing panel and 1.5 for lower and 1.6 kg for seat cowling. To ensure a safe delivery, the box they are sent in weighs 4 kg.
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
TYGA no: BPFS-0140
SKU: suz-10095 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki