Carb Service Kit A, 40 pieces, Honda RVF400 NC35
€81.81
Carb Service Kit A, 20 pieces, Honda RVF400 NC35
LiteTek Carburettor Seal Kit to suit: Honda RVF400 NC35
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-002 Float Bowl Ring, Material: Flourosilicone (Part of Honda Kit No. 16010-MR8-900)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
4x OR-011 Needle O-Ring, Material: Viton 70A (Part of Honda Kit No. 16010-MR8-900)
TYGA no: CK-Honda-NC35
SKU: alg-10351 Categories: ALL products, Carburettor Service Kits,, Honda, RVF400RR NC35, Shop, Various partsExhaust Chamber, Right, Stainless Steel, MC21
€317.17
This is the bare right side replacement chamber in stainless steel for EXCS-0005A suitable for EXCS-005A and EXCS-006A for the MC21
Set pipe Full race system WSS300 (street), KTM RC390
€1,155.39
Set, Pipe, Full Race System, WSS300, (Street) KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: EXPS-0111
SKU: ktm-10146 Categories: ALL products, Exhausts, Exhausts, KTM, RC 390, Stock list, all modelsUpper Cowling Street (GRP), MC18 GP-T, Assy.
€257.70
Upper Cowling Street (GRP), MC18 GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the MC18 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9035 and other mounting hardware it comprises set BPFS-0157.
This cowling is supplied with a plastic bung to mount to the meter stay.
Compatible parts:
BPFL-9035 Lower Cowling
TYLY-0121 Upper Stay
TYLY-0154 Meter Stay
BPSY-0143A Side Stay Kit
TPER-0013 Steering Stopper
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
Pillion seat cover “carbon”, KTM RC390 2022 –
€177.68
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCX-7731
SKU: ktm-10209 Categories: ALL products, Bodywork and carbon, Exhausts, KTM, RC390 2022-, Stock list, all modelsUpper cowling GP-T, Honda NSR250 MC21/MC28
€257.70
Upper Cowling Street (GRP), NSR250, GP-T, Assy.
Stylish replacement fairing designed in-house by TYGA Performance to give the NSR250 a contemporary look. This upper cowling utilizes stylish twin double unit LED headlight units, BPLT-0027. Together with lower cowling BPFL-9033 and other mounting hardware it comprises set BPFS-0137.
This cowling is supplied with a plastic bung to mount to the meter stay.
See also BPCU-9033 for carbon version of this product.
Compatible parts:
BPFL-9033 Lower Cowling
TYLY-0121 Upper Stay
BPLT-0027 Headlight
BPSY-0155 Fairing Adaptor Stay
BPSY-0143A Side Stay Kit
SCRE-0161 Screen, Clear GP-T, or SCRE-0162 Screen, Tint GP-T
TYGA no: BPFU-9033
SKU: hon-10533 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21, NSR250 MC28, ShopTriple Clamp Set, CNC Silver race, NSR250 M21/MC28 to fit NX5 forks
€714.33
Triple Clamp Set, CNC Silver, Race, NSR250 MC21/28 To Fit NX5 Forks
CNC machined TYGA triple clamp set for the MC21 to take Honda RS250 NX5 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy, and anodized clear. FEA tested and developed for increased strength without unnecessary weight increase.
This triple clamp set is delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
There is no provision for the ignition switch, so an alternative mounting location must be found.
Pitch of forks: 200mm (Same as RS250)
Fork Offset: 35mm (Same as NSR250)
Top Clamp: 50mm Bore
Bottom Clamp: 54mm Bore
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0262
SKU: hon-10914 Categories: ALL products, CNC parts, CNC parts, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Seat set RVF (With taillight holes), NC35
€242.59
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please not for this product with no taillight holes, please order BPFT-9104.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
TYGA no: BPFT-9004
SKU: hon-10140 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop