Set pipe Full race system WSS300 (race), KTM Duke 390
€1,129.89
Set, Pipe, Full Race System, WSS300, (Race) KTM 390 Duke
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield.
WEIGHTS
EXPS-0142 (the full system) 3.8 kg
Weights Separate parts in the set:
Silencer EXSL-0074 : 1.55 kg
Final section EXPT-0078: 1.3 kg
Header pipe EXPT-0077: 0.6 kg
all other components (manifold clamp, db killer, heat shield hoses etc) 0.35
Set pipe Stainless full race system “no silencer”, Kawasaki ZXR400L
€644.67
Set, Pipe, Stainless, Full Race System (No Silencer), ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs. As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
In this set NO silencer is included please see EXPS-0138, EXPS-0139 and EXPS-0140 for systems with silencer
Handle bar tube (275mm) silver, Honda RS250 NX5/NXA
€22.89
Handlebar Tube, (275mm) Silver (Assy)
Handlebar Tube, Silver (Assy),Suitable for both left and right sides.
The Handle bar diameter is 7/8” (22.2mm)
Comes fitted with plastic bungs in each end.
TYGA no: TYLY-0569
SKU: hon-11214 Categories: ALL products, CNC parts, CNC parts, Honda, RS250R NF5 / NX5, ShopRod M6 rightd.
€14.78
Replacement rode end joint for your TYGA Step Kit.
M6 RH F. Rod End SIBP6S
TYGA no: STRE-0006
SKU: alg-10040 Categories: ALL products, By model, CNC parts, Hawk/Bros 400/650, Honda, Kawasaki, Ninja 400R 2018-, ShopHandlebar Clamp, Left, Silver, 41 mm.
€93.45
Replacement Left handlebar clamp for handlebar set TYLY-0077
Exhaust Chamber, Stainless Steel, Aprilia RS-125
€319.17
Bare chamber for EXCS-0019
Carb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsCarbon Rear hugger with chainguard, Suzuki RGV 250
€214.35
Rear Hugger/Chain Guard (Carbon), VJ22 RGV250
This product is designed to fit both the braced and ‘banana’ arm model VJ22s and is ideal for countries where regulations stipulate a chain guard for street bikes.
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCH-9108
SKU: suz-10091 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, Suzuki