VHM cylinder head (2 pieces), Honda NSR250 MC16
€604.90 €544.41
VHM cylinder head (2 pieces), Honda NSR250 (alg-10096)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide, and we are now pleased to be able to offer their cylinder heads for use on the NSR250
VHM produces exchangeable cylinder heads for two-stroke engines in motocross and road racing. With the experience gained in two-stroke tuning, VHM develops products of high quality.
During intensive tests, on the racetrack as on the VHM dyno, the cylinder head showed a better temperature development in the cylinder head. A lower engine temperature followed. The explanation of this phenomenon is the use of a special aluminum alloy which has a very good heat transference. Another advantage of the material is its resistance to detonation.
The VHM cylinder head is designed with removeable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.60cc)
These heads use a centrally located spark plug and coolant outlet spigot just like the standard NSR rear cylinder. Therefore an HRC style hose is required which must also be ordered.
1x HRC style coolant hose for front head (not shown) part no. alg-10102
Seat cowling stock shape painted RR, Honda RVF400 NC35
€419.72
Seat cowling stock shape painted RR, Honda RVF400 NC35
Stock shape seat cowling with or without taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad. Please specify if you would like taillight holes and taillight mount made for no extra charge. If we receive no comment, we will send with taillight holes and mounts.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
Painted in classic RR scheme (1994-95). This panel is finished to match the stock paintwork
TYGA no: BPFT-9004 (Painted RR)
SKU: hon-10515 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopCarbon hugger short, Ducati 848/1098/1198
€122.25
This carbon rear hugger protects the rear shock and underside of your pride and joy from road dirt as well as making your bike stand out from the crowd. Very easy to install. Weight approx. 0.10 kg.
Note; we also make a longer hugger (BPCH-7123) for this model shown in photo for comparison
Front Fender black, Honda MSX125 GROM
€88.02
Front Fender, Asteroid Black Metallic, MSX125 Grom
TYGA no: 61100-K26-900ZD
SKU: MSX-10097 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopExhaust Hanger Stay, Pair, Carbon, RGV250, VJ23
€108.42
Rear Hugger/Chain Guard (Carbon), VJ23 RGV250
The VJ23 RGV250 is the only RGV250 model which does not have a rear hugger as standard and as a result, all the road filth and rain tends to collect around the rear shock and under side of the seat cowling. TYGA Performance have developed this carbon hugger as a solution to the dirt issue while making the swing arm/rear wheel part of the bike more attractive. Designed to fit onto the contour of the VJ23 swing arm’s fabrication and lock into position by a rub underneath, the TYGA hugger incorporates the rear chain guard too, using the chain guard’s mounting holes on the left to hold it securely in place. On the right side, it is held on by a cable tie through the rear brake line guide and at the front by an M4 bolt which is requires drilling and tapping of the swing arm by the customer to install this product.
IMPORTANT, note that due to the VJ23 never having the option for a rear hugger, there is no position provided on the swing arm to mount the hugger at the front and it is necessary to drill and tap an M4 hole in the swing arm and use a cable tie to provide a good level of support for the hugger. See photos 7 and 8 for details on what is required to install this product.
Complete with all fitting hardware.
Seat, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
€38.42
Seat, Side Panel, Left, Green, Ninja 250R/300R 2013 -18
TYGA no: 53065-5016-H8
SKU: kaw-10175 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R/300R 2013 -, ShopTop triple clamp silver set, CBR250 2011 –
€280.14
CNC machined top triple clamp with detachable ignition switch/lock holder for your CBR250R and CBR300R. Designed and manufactured in house as a direct replacement for the standard top triple clamp. Fully functional steering lock.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp and ignition switch/lock holder set offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0069
SKU: hon-10189 Categories: ALL products, CBR250R 2011 - 15, CBR300R 2014-, CNC parts, CNC parts, CNC parts, Honda, ShopCarbon headlight surround, Honda MSX125 2021-
€162.86
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7148
SKU: msx-10507 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, Shop