Carbon silencer guard WSS300 race system, KTM RC390
€127.88
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: BPCC-0076
SKU: ktm-10201 Categories: ALL products, Exhausts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCrankshaft bearing , Honda NSR250 MC21/MC28
€288.13
Crankshaft Bearing, Set, NSR250 MC21/28
Set of three genuine OEM KOYO main crankshaft bearings for your Honda NSR250 MC21/28 consisting of one each of the left, centre and right crank bearings.
TYGA no: TYPP-0012set
SKU: hon-10505 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Shop, Various partsFront fender,Suzuki RGV 250
€71.75
Front fender,Suzuki RGV 250 (suz-10008)
This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
TYGA no: BPFF-9008
SKU: suz-10008 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiStud, A, MC28
€4.36
Stud, A, MC28
TYGA no: 90031-KV3-830
SKU: hon-11133 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carbon engine covers pair, Ninja 400
€289.78
Engine Covers, (Carbon), Pair, Ninja 400, 2018-
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
TYGA no: BPCC-7140
SKU: kaw-10128 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Carb Service Kit A, 36 pieces, Suzuki GSXR400 (GK76)
€81.92
Carb Service Kit A, 36 pieces, Suzuki GSXR400 (GK76)
LiteTek Carburettor Seal Kit to suit: Suzuki GSXR400 (GK76)
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-007 Float Bowl Ring, Material: Flourosilicone (OE part number: 123258-33C00)
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A (OE part number: 13295-29900)
4x WS-001 Pilot Screw Washer, Material: Stainless Steel (OE part number: 13291-2990)
4x JH-004 Jet Housing Seal, Material: Viton 70A (OE part number: 13251-33C00)
4x OR-001 Top Cap O-Ring, Material Viton 65 (OE part number: 13251-06C10)
4x OR-010 Float Mount O-Ring, Material: Viton 70A (OE part number: 13374-44030 superseeded by 13374-35C00)
4x OR-018 Slide Housing O-Ring (OE part number: 13278-47090)
4x OR-015 Main Jet Housing O-Ring, Material: Viton70 A (OE part number: 13294-33C00)
4x OR-010 Pilot Merge Cavity O-Ring, Material: Viton 70A (OE part number: N/A)
TYGA no: CKA-Suzuki-GSXR400-GK76
SKU: alg-10344 Categories: ALL products, Carburettor Service Kits,, SuzukiTop triple clamp CNC black, KTM RC390, 2022-
€222.31
Set pipe Full race system WSS300 (race), KTM RC390
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield and a bracket so you can mount this system on the earlier RC390 models which did not have this already on the frame, meaning this exhaust will fit all RC390 models to date.
Sound test of the full TYGA system back to back with the Akrapovic World Supersport 300 titanium pipe.
As you can see on the chart below, the sound levels (without DK) are pretty much identical between the two systems. The DK knocks about 5 decibels off everywhere.
Due to the new routing of the exhaust, it is necessary to re-route the water hoses and remove the thermostat, and we provide all the necessary hoses for this conversion. Also, due the exhaust running under the engine, the stock belly pan is not compatible and we provide some alternatives which are not included in the cost of the exhaust.
Note, this is what we describe as the ‘Street’ system. The only difference between this and the race one is the silencer is in a more out board position to clear license/Registration place when used on the street. Powerwise, it is identical to EXPS-0112
TYGA no: TYLY-1273
SKU: ktm-10208 Categories: ALL products, CNC parts, Exhausts, KTM, RC390 2022-, Stock list, all modelsCarbon front fender, Aprilia RSV125 2012 –
€198.78
Front Fender (Carbon), 2012-2014 Aprilia RSV 125
Let your bike stand out from the crowd with this beautiful carbon fibre product.