Carbon tankshields, Honda CBR600 2007-12
€293.21
These high quality carbon parts replace the cheap looking plastic original parts supplied by Honda. They are complete with all the fitting tabs and fastener positions for a perfect fit.
Please note TYGA logos are applied over the clearcoat and can easily be removed.
Top End Rebuild Kit MC18, Cyl. A, Assy.
€293.88
Below is everything you need to do a top end rebuild on your MC18. Suitable for cylinder ‘A’. One kit includes all parts for one cylinder. To overhaul both cylinders please order 2 kits.
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0002A
SKU: hon-10878 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC18Tail tidy (GRP), Honda MSX125 GROM
€153.51
This cool tail tidy, made from GRP, replaces the huge heavy one provided by Honda. At least Honda made it easy to remove theirs, and ours is quick and easy to install with no modification of components needed. Complete with license plate light and mini turn signals, harness with correct connectors and flasher relay unit to maintain the correct flashing speed. Can be used with stock or TYGA exhaust system. With the way this product transforms your bike, you’d be crazy not to install it.
demand outstrips supply, so please order early to avoid disappointment.
Please note, photos show the carbon version of this product installed on bike (BPCX7528). The two products are identical in shape but thsi one differs in that it is finished in plain flat black
TYGA no: BPFX-7528
SKU: MSX-10180 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2013 - 2015, ShopUpper Cowling (Race, GRP), MC21, Stock Shape, Assy.
€132.42
Upper Cowling (Race, GRP), MC21, Stock Shape, Assy.
Fiberglass race version of the OEM shape upper
Compatible Parts:
MC21 and MC28 OEM lower cowling, Tyga lower cowling: BPFL-0001. Also see BPFS-0112 for complete race bodywork set for MC21
Tyga Performance Accessories:
Requires screen SCRE-0016, SCRE-0017, SCRE-0018, SCRE-0019 and SCRE-0020
This race upper fairing is made from a modified street version by filling in the headlight hole (s) and blending with the surrounding surface area.
TYGA no: BPFU-1006
SKU: hon-10865 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21Front fender grp, Ninja 400
€85.28
Front Fender, (GRP), Ninja 400
TYGA no: BPFF-7040
SKU: kaw-10138 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Front fender “stock type” , Honda VFR750 RC30
€111.13
Upper cowling “stock”, Honda VFR750 RC30 (hon-10569)
Direct replacement for OEM Honda lower cowling with headlight and indicator holes filled in. Due to being constructed with strong flexible epoxy resin, it is thinner and therefore about 65% the weight of the stock upper cowling. In every other way, the same as stock. Can be used with TYGA Performance or factory Honda RC30 lower cowlings.
Number board miniRacerXtreme, Honda MSX125 GROM
€32.64
Number Board, (GRP) MiniRacerXtreme, MSX125 Grom
This product fits over the front of the fairing on the MiniRacerXtreme to transform the fairing from street to race. Easy installation and can be used with or wothout the headlight installed
Fairing set street T13, Honda VFR400 NC30
€966.12
Newly introduced for 2013, the T13 body kit has been designed to be both contemporary and stylish and provide an updated alternative to our popular RC211V kits. The GRP panels this kit uses are made from using high quality epoxy resin and is both light and flexible. We also make the same kit but extensive use of carbon fiber, see BPFS-0120.
This set of bodywork requires modification of the NC35 including a tank cover, a meter stay and all the other components listed below which are also available separately.
*A clear screen is provided unless you specify tinted in the comment box at check out
Laminated in top quality molds by our skilled and experienced workers, TYGA Performance fiberglass products are renowned for their quality and value for money. Order with confidence.
Take a look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: BPFS-0119
SKU: hon-10354 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, VFR400RR NC30