Tyga Step Kit Replacement Link Rod, 238mm
€16.92
Tyga Step Kit Replacement Link Rod, Male, 238 mm.
Uses M8x1.25 thread in one end and M8x1.25 L/H thread in the other. 238mm in length.
Race airbox lid, Honda NSR250 MC21/MC28
€131.29
The stock airbox is restricted by the size of the inlet holes on the lid which limits the amountof power that can be unleashed from the NSR250. By replacing the stock airbox lid with the TYGA Performance version, the inlet to the airbox is more than doubled in size and the flow improved by having one large trumpet.
This product is a direct replacement for the stock one and uses all the stock hardware. It even has an ‘O’ ring groove so by removal and re-use of the stock airbox lid ‘O’ ring, a perfect seal with the airbox can be retained. A mesh is supplied in the airbox to hold the stock air filter securely in position.
This is the budget version in GRP. For carbon version, please also check out BPCX-9010.
TYGA no: BPFX-9010
SKU: hon-10383 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopCarbon tank cover, Yamaha R1 2007-8
€224.38
Tank Cover (Carbon) 2007-8 Yamaha R1.
Let your bike stand our from the crowd.
Carbon tail light surround satin, Honda NSR250
€110.40
Taillight Surround (Carbon), NSR250 MC21, Satin
This carbon taillight surround replaces the stock plastic part and is easy to install to give your bike a fresh and individual appearance.
Note, TYGA decal peels off if not required.
TYGA no: BPCX-0003fÂ
SKU: hon-10572 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, Honda, NSR250, NSR250 MC21, ShopSeal, Clutch Pusher, MC28 SE/SP
€4.54
Seal, Clutch Pusher, MC28 SE/SP
TYGA no: 91302-KV3-781
SKU: hon-11104 Categories: ALL products, High performance, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Cowling Right flat black, Honda MSX125 GROM
€23.35
Cowling right flat black, OEM Honda part
TYGA no: 77215-K26-900ZH
SKU: MSX-10319 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopFairing set street RC211V TE3, NC35 kit
€910.45
The kit faithfully reproduces many of the 2006 model RC211V fairing features including front air ducts, side air duct design and full console joining up to the tank. Differs in headlight fitment from BPFS-0013.
This set of bodywork requires extensive modification of the NC35 including a tank cover, a meter stay for quick fastening of fairing upper and for the instruments to gain clearance with headlights and all the fitting hardware. It also includes a steering stopper to limit steering movement.
Comprises the parts shown below which are also available separately:
*A clear screen is provided unless you specify tinted in the comment box at check out
TYGA no: BPFS-0033
SKU: hon-10129 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35, ShopFront fender (grp) stock shape, Honda RS250R NXA
€80.91
Airbox, Carbon/Kevlar, NSR250 MC21/MC28
This high quality carbon/Kevlar air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and carbon/kevlar for beauty and light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank.
See also similar product in GRP: BPFX-0007