Silencer clamp single 60mm
€11.78
This single silencer clamp is specifically designed for TYGA expansion chambers for the Honda NSR150 and Aprilia RS125
Designed to securely clamp 60~61mm O.D. silencers.
Fabricated in 304 Stainless Steel with Molded rubber for secure, yet safe clamping.
Compatible with the following TYGA systems:
EXCS-0002
EXCS-0007
EXCS-0013
EXCS-0019
EXCS-0037
Please note that the correct clamp is provided when you purchase any complete expansion chamber system with silencers. You do not need to order separately.
TYGA no: EXCL-0010
SKU: alg-10001 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, NSR125 JC22 1994 - 2003, NSR150SP, RS125, ShopShorty fuel tap, NSR250 MC21/MC28
€8.18
Shorty fuel tap, NSR250 MC21/MC28
3D printed.
TYGA no: TYLY-0237
SKU: hon-11069 Categories: ALL products, Honda, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28, Various parts, Various parts, Various partsSet pipe Full race system WSS300 (race), KTM Duke 390
€1,129.89
Set, Pipe, Full Race System, WSS300, (Race) KTM 390 Duke
This full exhaust system has been conceived to meet WSS300 specifications and carefully designed to squeeze the most power out of the 390 Duke. The stainless steel headers are tapered and the sections hand- rolled and welded to give this system incredible looks as well as performance.
And with full spring mounting, fitting and removal of the exhaust is quick and simple. Ideal in a race environment.
By taking advantage of better routing under the engine, the exhaust can be made to optimize dimensions to exploit the motor’s full potential. In addition, by tucking it up through the swing arm, the exhaust does not have any clearance issues in tight bends and is kept away from side which is the most vulnerable position in the case of an accident, increasing its survivability.
The system features a primary silencer, which helps reduce the sound level without any loss of performance.
The system is also provided with a dB killer as well as a carbon heat shield.
WEIGHTS
EXPS-0142 (the full system) 3.8 kg
Weights Separate parts in the set:
Silencer EXSL-0074 : 1.55 kg
Final section EXPT-0078: 1.3 kg
Header pipe EXPT-0077: 0.6 kg
all other components (manifold clamp, db killer, heat shield hoses etc) 0.35
Front fender,Suzuki RGV 250
€71.75
Front fender,Suzuki RGV 250 (suz-10008)
This is apart made in fiberglass (GRP) which has been primed in PU. Some minor preperation is required prior to paint.
TYGA no: BPFF-9008
SKU: suz-10008 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ22, Shop, SuzukiCarbon front fender, Yamaha R6 2006-12
€220.20
carbon front fender,
Direct replacement for original Yamaha fender.
Let your bike stand out from the crowd.
TYGA no: BPCF-7009
SKU: yam-10018 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Carb Service Kit A, 48 pieces, Honda VFR750R RC30
€97.64
Carb Service Kit A, 44 pieces, Honda VFR750R RC30
LiteTek Carburettor Seal Kit to suit: Honda VFR750R RC30
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
4x FB-025 Float Bowl Ring, Material: Flourosilicone *
4x OR-005 Pilot Screw O-Ring, Material: Viton 70A *
4x WS-001 Pilot Screw Washer, Material: Stainless Steel
4x OR-009 Drain Screw O-Ring, Material: Viton 70A *
4x OR-040 Air Cut Seal, Material Viton 70A *
4x OR-041 Breather O Ring, Material: Viton 70A **
4x OR-016 Top Cap O-Ring, Material: Viton 70A *
4x OR-042 Float Bowl O-Ring, Material: Viton 70A *
4x OR-011 Overflow O-Ring, Material: Viton 70A **
4x OR-012 Fuel Tee O-Ring, Material: Viton 70A **
4x CS-004 Choke Plunger Cap, Material: HNBR
Honda OEM parts numbers :
* No: 16010-MR7-014 → 16010-MR7-505 or 16010-MR7-691 → 16010-MR7-692 → 16010-MR7-505
** No: 16040-MR7-004
TYGA no: CK-Honda-RC30
SKU: alg-10349 Categories: ALL products, Carburettor Service Kits,, Honda, VFR750R RC30Carbon front fender (GRP), HRC NSR250 replica
€200.13
Front Fender, Carbon, HRC NSR250 replica
This front fender follows the design of the type used on factory 250 cc GP World Championship NSR250s from 1992 through to 1995 and is not suitable for the MC18/21/28 street bikes with the same NSR250 name. We managed to source one of these factory front ends and needed a fender to suit so this is why we have the design. There is probably very little demand for this model but just in case someone wants to use it on their special etc, we offer it as part of our product range.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc
TYGA no: BPCF-0007
SKU: hon-10943 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon rear shock reservoir stay, Honda VFR400 NC30
€75.27
Rear Shock Reservoir Stay, Carbon, VFR400R NC30
Suitable for the Honda VFR400R NC30 which uses a rear shock with remote reservoir ( 1990-onwards)
TYGA no: BPCC-0046
SKU: hon-10957 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, Shop, Various parts, VFR400RR NC30