Carbon ignition cover, Yamaha R6 2006 – 12
€67.43
Ignition Cover (Carbon) 2006-12 Yamaha R6
TYGA no: BPCC-7302
SKU: yam-10010 Categories: ALL products, Carbon, Shop, Yamaha, YZF-600 R6 2006- 7, YZF-600 R6 2008- 12Belly Pan, (GRP) RD250/350LC (4LO)
€181.29
Belly Pan, (GRP) RD250/350LC (4LO)
This belly pan faithfully compliments the classic lines of the legendary ‘Elsie’ along similar lines to the ones used back in the day, complete with the obligatory air scoops on either side. Although the design is traditional, the construction is modern and we have taken advantage of modern materials and techniques to bring you a better product than others on the market.
The belly pan itself is made from high strength epoxy resin and 200 gram glass fabric, making it flexible and light and attractive both on the inside and out. The mounting brackets are laser cut for precision and better aesthetics and they are covered by a plastic coating to give them a firm but kind grip on the frame rails. There is a great deal of adjustability built into the design and to allow our customers to mount this part in exactly the position they desire, based on other modifications such as exhausts, we supply it undrilled.
This product is supplied primed, however, will require minor preparation, before it’s ready for paint.
This product is suitable for stock and our exhaust system, EXCS-0044 which we offer for the RD350LC (4L0)
As well as this GRP (Glass reinforced plastic) version, we also supply a carbon version, BPCL-7032
Undertray seat, Ninja 400
€60.24
Undertray, Seat, (GRP) Ninja 400
Replacement undertray for TYGA Seat Cowling BPFT-7040(p)
TYGA no: BPFX-7040
SKU: kaw-10136 Categories: ALL products, Bodywork and carbon, Kawasaki, Ninja 400R 2018-Carbon frame cover (pair), Honda RVF400 NC35
€361.23
These lightweight carbon covers fit over the frame and they are designed to protect against scratches and damage to the frame in the event of an accident
TYGA no: BPCC-7418
SKU: hon-10625 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35Exhaustset stainless steel alum. silencer round, Kawasaki ZXR250
€506.31
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)This system is supplied with a round aluminium silencer EXSL-0033
Independent Review:TYGA Ninja 250R Race Exhaust System Dyno ResultsOctober 29th, 2010 Adam2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock ExhaustI’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!Ninja 250R Dyno results are for the following runs:Black: Stock Exhaust (no modifications whatsoever)Blue: Stock Exhaust (snorkel removed)Red: TYGA Round Aluminum Race System (snorkel removed)Note: Carbs were not jetted. Fuel mixture screws were not adjusted.HP Gains:1) Remove snorkel ( 1.5HP) == 28.1HP!2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!Total: 5.7HP ( 4.2HP from TYGA exhaust!)Weight Comparison (lbs):Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbsTYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbsWeight reduction: 8.6 lbs!** does not include mounting clamp or bolt* includes all hardware – ie: springs, bung plug, manifolds<iframe width= 560 height= 315 src= https://www.youtube.com/embed/z5hGKrpQ56c frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0018
SKU: kaw-10018 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12, ShopSet full race system with stainless silencers with carbon cap, Kawazaki Z125 2016-
€536.29
Set, Pipe, Full Race System, Kawa Z125, Stainless Oval/Carbon End Cap
This full race system has been specifically designed for the Z125 to maximise performance and looks. The header section has a special bulge to reduce the sound level, without sacrificing power. Complete with Lambda boss for 100% compatability with the stock electronics.
The final silencer is constructed using a stainless steel sleeve with a carbon exit cap and a CNC machined aluminium entry cap for a high quality finish, This system increases performance, saves weight and enhances the looks of the bike. The system is supplied with a decbel killer for noise reduction.
Performance and Dynograph
The green trace shows the 100% standard Kawasaki Z125, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0063)
A useful gain all through the range, with potential for other engine mods.
Kawasaki Z125 Sound Level Test
Test Method: SAE J2825 Static sound level test for motorcycles
Equipment: DIGICON IEC-651 TYPE II sound meter
RPM TYGA System – No DBK TYGA System – DBK Installed OEM System
Idle 82 73 69
4000 92 84 81
5000 93 85 86
6000 95 87 91
TYGA no: EXPS-0063
SKU: kaw-10055 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Shop, Z125 2016-Carbon shroud insert pair, MSX125 2021
€288.12
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7648
SKU: msx-10511 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopWaterpump rebuild set, Honda NSR250 MC21/MC28
€63.89
All necessary seals and bearing to rebuild your NSR250SP/R waterpump.
Please note that it is necessary to remove the clutch cover to overhaul the waterpump, so a clutch cover gasket may also be required.
TYGA no: NHPS-0008
SKU: hon-10557 Categories: ALL products, High performance, Honda, NSR250 MC21, NSR250 MC28, Shop, Various parts, Various parts