Tyga Step Kit Replacement Brake Link, KTM
€12.99
This replacement part fits to the Tyga step kit brake lever on the KTM RC390 etc.
TYGA no: STAC-0012
SKU: ktm-10126 Categories: ALL products, CNC parts, CNC parts, KTM, RC 125/200, RC 390, Stock list, all modelsExhaustset race Stainless steel carbon Silencer round w cap, NC30 NC35
€1,251.76
TYGA stainless steel racing exhaust, the best set available in the market
Exhaustset race Stainless steel, carbon silencers oval w cap, NC30 NC35 (hon-10302)
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. The system fits both the NC30 and NC35. Most systems are not designed to be used with a side stand on the NC30, but the TYGA system can be used with a side stand on both the NC30 and NC35.
For unsurpassed looks, sound and performance, this system can be used with any of our 400 system exhaust silencers.
If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only half the weight of the stock system makes for a weight saving of4.2 kg.
NC35:
First, an NC35 was tested with the original Honda exhaust system and produced a peak of 53.5hp; about the right number for a stock bike.
Then the pipe was changed for the TYGA full stainless system, and the main jets increased one size from stock front and rear. No other changes were made, and the peak hp increased to 59.9hp, a gain of 6.4hp (Over 8% more power!)
NC30:
On the NC30, the advantage over the stock exhaust system is higher. With just the TYGA pipe and a couple of main jet changes, the power leaps from a stock 52hp up to a healthy 59hp. That’s 7hp, or 13.5% more.
The pipe set can be used with any silencer with a2 inchinternal diameter bore which is held in place by springs for ease of fitment and removal. TYGA provide the following compatible silencers which can either be ordered separately with this system or together as a set.
The pipe set is supplied with a round carbon silencer EXSL-0112 which is held in place by springs for ease of fitment and removal. This system may not comply to specific country noise emission regulations and is not homologated for street use.
TYGA no: EXPS-0026
SKU: hon-10303 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Carb Service Kit, 14 pieces, Honda NSR250 MC16/18/21
€81.92
Carb Service Kit, 14 pieces, Honda NSR250 MC16, MC18, MC21
LiteTek Carburettor Seal Kit to suit: Honda NSR250 MC16, MC18 and MC21
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x FB-034 Float Bowl Seal, Material: Flourosilicone (Part of Honda kit: 16010-KM9-505)
2x TCG-001 Top Cap Gasket, Material: Gasket Paper (Part of Honda kit: 16010-KM9-505)
2x FB-035 Body O-Ring, Material FKM ((Part of Honda kit: 16010-KM9-505)
2x OR-009 Drain Screw O-Ring, Material: Viton 70A (Part of Honda kit: 16010-KM9-505)
2x OR-016 O-Ring, Material: Viton FKM (Part of Honda kit: 16010-KM9-505)
2x OR-012 Fuel Pipe O-Ring, Material: FKM (Part of Honda kit: 16010-KM9-505)
2x CS-004 Choke Plunger Cap Material: HNBR (Part of Honda kit: 16046-KV3-950)
Suitable for the following carbs:
MC16: TA10
MC18 ’88: TA20
MC18 ’89: TA21
MC21: TA22
TYGA no: CKA-Honda-MC16,18,21
SKU: alg-10372 Categories: ALL products, Carburettor Service Kits,, Honda, NSR250, NSR250 MC18, NSR250 MC21, Various parts, Various partsRegistration/License Plate Holder, (GRP), T13 Assy.
€43.40
This product is made using GRP and holds the registration/license plate for use with our T13 seat cowlings. It is supplied with a registration/license plate illumination light for countries where this is a legal requirement. We also make the same product but using carbon fiber, see BPCX-9118
This product attches by means of two bolts on an angled back flat plate and could be adpted to be used with other models with a flat undersurface.
TYGA no: BPFX-9118
SKU: hon-10822 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Nut, 6mm, L/H thread, MC28
€2.28
Nut, 6mm, L/H thread, MC28
TYGA no: 90310-634-980
SKU: hon-11129 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Carburettor tray GRP , Honda VFR400/RVF400
€90.32
The carburetors on the NC30/35 are particularly prone to heat from the engine, which in turn heats up the fuel and lowers efficiency.
The TYGA carb tray for the NC30/35 aids in keeping the heat of the engine away from the carbs, and is fully compatible with all standard components. It will also help with keeping debris away from the carbs, if the carbs are being run full open.
No special tools are required to fit the carb tray.
TYGA no: BPFX-9309
SKU: hon-10359 Categories: ALL products, High performance, High performance, High performance, Honda, RVF400RR NC35, Shop, VFR400RR NC30Triple clamp set CNC silver, Honda NSR150
€142.52
CNC machined TYGA top triple clamp for race use ( not including detachable key holder) for your NSR150SP.
Designed and machined in house by TYGA, as a direct replacement for the OEM top triple clamp. FEA tested and developed for increased strength without unnecessarily increased weight.
Crafted from aircraft spec 6061-T6 alloy, the top triple clamp is ready to fit.
The detachable ignition switch/lock holder which is positioned to allow use of the steering lock can be bought separately or order as triple clamp set TYLY-0051.
Lower Triple Clamp, CNC Silver, Honda VFR400R/NC30
€364.10
Lower Triple Clamp, CNC Silver, Honda VFR400R NC30
CNC machined TYGA lower triple clamp for your NC30
Designed and machined in house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings.
This product is also sold as part of a set TYLY-0244, Triple Clamp Set, CNC Silver, NC30.