Carbon rear hugger, CBR125/CBR150 2011 –
€212.56
This lightweight carbon version of the stock hugger will enhance the beauty of your CBR as well as reduce unsprung weight.
TYGA no: BPCH-7108
SKU: hon-10166 Categories: ALL products, Carbon, CBR125R/CBR150R 2011-, Honda, ShopRunning Light Harness
€3.50
Steering Stopper, Honda VFR750R RC36 (94-97)
Steering stopper for race use. Reduces degree of movement in steering. Easy to attach using hole for the horn on the standard lower triple clamp.
TYGA no: 1330-419-00
SKU: hon-11523 Categories: ALL products, Electrical, Honda, RC36-2 -> RC30 replica products, Shop, Stocklist, various partsCarbon heel guard right,
€32.04
Replacement left heel guard for Tyga step kits, see model below. TYGA design, but will also fit standard Aprilia RS-250 hanger.
STAA-0006
STAA-0024
STAA-0124
TYGA no: BPCC-9008
SKU: apr-10028 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RS250, Shop, Various partsDecal set, type 11 marigold yellow scheme, Honda MSX125 GROM
€53.08
Decal Set, MSX125, Type 11, 2015 Marigold Yellow Scheme. This set comprises of a complete set of all the OE Honda decals required for the painted panelson the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets.
TYGA no: STIC-0026Z
SKU: MSX-10316 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopSeat set RVF (With taillight holes), NC35
€242.59
Stock shape seat cowling with taillight holes. Single seat, direct replacement for stock NC35 seat cowling in the same shape but with the exact top part of the RC45 single seat replacing where the passenger seat was. This seat cowling uses OEM seat pad.
Please not for this product with no taillight holes, please order BPFT-9104.
Compatible Parts:
All Tyga Performance and Honda OEM panels. Retains use of Honda OEM taillight and seat pad
TYGA no: BPFT-9004
SKU: hon-10140 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, ShopTop end rebuild set Cylinder B, Honda NSR250 MC21/MC28
€293.88
The picture shows everything you need to do a top end rebuild on your MC21/28. One kit includes all parts for one cylinder (cylinder ‘B’). To overhaul both cylinders please order 2 kits.
Honda OEM:
1x Gasket cylinder 12192-KV3-680
1x Gasket head 12251-KV3-830
1x Piston ring 13010-KV3-305
1x Piston no mark 13102-KV3-830
1x Piston pin 13111-KV3-771
1x RC valve shaft E clip 90601-KV3-000
1x Bearing piston 91102-KV3-771
1x Seal, RC valve shaft 91201-PA9-004
2x Dowel cylinder 94301-10160
2x Piston Circlip 15mm 94601-15000
There are different kits depending on the piston supplied and the pistons are sized to match the cylinder. The cylinders have a letter stamped on them. A cylinder = B piston B cylinder = no mark piston, C cylinder = D piston. The largest cylinder bore is A and the smallest is C. However, note that this is only for when cylinders are new or in good condition, so if the cylinder is worn, the corresponding piston will be a looser so a bigger piston might be advised. If the cross hatch honing of the cylinder is very feint then we suggest using the next size up piston. The differences in sizes are tiny (11 microns between largest and smallest) and for the most part not an issue so it is not a problem if a smaller piston is used in a larger cylinder or the other way round.
Cylinder A = 54.008mm – 54.011mm use Piston B = 53.966mm – 53.969mm
Cylinder B = 54.004mm – 54.008mm use Piston # = 53.962mm – 53.965mm
Cylinder C = 54.000mm – 54.004mm use Piston D = 53.958mm – 53.961mm
Piston to bore clearance = 0.039mm – 0.045mm
TYGA no: NHPS-0001B
SKU: hon-10440 Categories: ALL products, High performance, High performance, High performance, Honda, NSR250 MC21, NSR250 MC28, ShopSet exhaust chamber “mini” titanium.
€239.95
Set, Exhaust Chamber, Mini, Titanium
This miniature titanium chamber encapsulates the spirit of the two stroke enthusiast. Taper coned, these all titanium chambers are hand rolled and welded one by one by our expert welders, the very same method by the very same craftsmen who fabricate our full sized chambers for road and racing machines.
In fact each miniature chamber takes almost the same time to make an actual full sized one! This limited production piece is supplied with its very own real carbon fiber display stand to make it really stand out and look special.
Makes a great gift or talking point among visitors to your office or man cave!
* Not to be confused with a real motorcycle exhaust chamber, for decoration purposes only, though in theory it will work!
TYGA no: EXCS-0048
SKU: alg-10365 Categories: 2 stroke exhaust sets, ALL products, Aprilia, Cagiva, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Exhausts, Mito 125, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RD350LC 4L0, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RS250R NF5 / NX5, ShopSeal, Kickstart, MC28
€6.23
Seal, Kickstart, MC28
TYGA no: 91204-MC7-003
SKU: hon-11084 Categories: ALL products, High performance, Honda, Honda OEM products, New OEM Honda parts, NSR250, NSR250 MC21, NSR250 MC28