Exhaust stay hanger (pair), Honda NSR250 MC18 (1988)
€35.22
This pair of stays replaces the stock rear passenger peg hangers and is required to mount the Tyga Exhaust system EXCS-0003 on the 1988 MC18. Not suitable or required for the 1989 version with the flip down passenger pegs.
TYGA no: BPSY-0130
SKU: hon-10415 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopFitting kit for Under cowl BPFL-7328 and BPCL-7328
€32.07
Fitting Kit for Under Cowl BPFL-7328 and BPCL-7328
Complete replacement fitting kit for TYGA-Performance Under Cowl (Belly exhaust type) for Honda MSX125/GROM
Suitable for BPFL-7328 (all colours) and BPCL-7328
Only sold as complete set.
TYGA no: TYBP-7328
SKU: msx-10463 Categories: ALL products, Honda, Monkey 125 2018-, MSX125 2013 - 2015, MSX125 GROM, MSX125SF 2016 -2020, Shop, Various parts, Various partsEngine stand, Aprilia RS250/Suzuki RGV250
€81.09
Engine stand for Aprilia RS-250 and RGV250, (VJ21 and VJ22 models).
No more chasing the engine around the bench as this stand allows for dual positioning so that whichever cylinder is being serviced is always easily accessible from the top.
Also rather handy for draining oil on a loose engine, or just neat storage.
Uses standard engine rubbers in engine mounts and is held in the stand with the standard engine mount bolts.
Zinc plated steel for corrosion resistance and good looks. A necessity for any RGV250 or RS250 engine builder!
TYGA no: TYTO-0029
SKU: alg-10124 Categories: ALL products, Aprilia, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Suzuki, Universal parts, Various parts, Various parts, Various partsPiston Pin MC18~28
€21.90
Piston Pin MC18~28
TYGA no: 13111-KV3-771
SKU: hon-11179 Categories: ALL products, Honda, Honda OEM products, New OEM Honda parts, New OEM Honda parts, New OEM Honda parts, NSR250, NSR250 MC18, NSR250 MC21, NSR250 MC28Carbon tank filler cap cover Honda, CBR600 en CBR1000
€35.23
Carbon Tank Filler cap Cover. Fits most Honda sports bikes including:
MC18, MC21, MC22, MC28
NC23, NC29, NC30, NC35
Most other modern sports bikes such as CBR600, and CBR900, 1000 and 1100XX models
TYGA no: BPCC-0002
SKU: hon-10009 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, RVF400RR NC35, Shop, VFR400RR NC30, VTR1000Sp1SP2Set windscreen molding and clips,
€25.91
Mini LED turn signal lamps. Universal fitting. Bright but small and discrete, these units are easy to install requiring just one hole. Ideal for the finishing touch of any custom project. Please note that any LED turn signals draw a smaller current than most standard fitment ones and will need suitable flasher relay in order to flash at the correct speed.
TYGA no: BPAC-0015
SKU: hon-11324 Categories: 848 / 1098 / 1198, ALL products, Aprilia, Cagiva, CBR1000 2004-7, CBR1000 2008-11, CBR1000 2012-, CBR125R/CBR150R 2004-10, CBR125R/CBR150R 2011-, CBR250R MC19, CBR250RR MC22, CBR400RR NC23, CBR400RR NC29, CBR600RR 2003- 4, CBR600RR 2005- 6, CBR600RR 2007- 16, CBR900RR 1992- 95, Ducati, Honda, Mito 125, Monster, NSR125 JC22 1994 - 2003, NSR150SP, NSR250 MC18, NSR250 MC21, NSR250 MC28, RC36-2 -> RC30 replica products, RG125, RGV250 VJ21, RGV250 VJ22, RGV250 VJ23, RS125, RS250, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, Various parts, various parts, Various parts, Various parts, various parts, Various parts, Various parts, VFR400RR NC30, VFR750F Gen 3 90-93, VFR750F Gen 4, 94-97, VFR750R RC30, VTR1000Sp1SP2, Yamaha, ZXR250C, ZXR400LCollar/manifold Special , NSR250
€62.38
This is a special replacement part for the NSR250. The manifold has a CNC machined profile, matching the exhaust port exit to allow smooth exhaust gas transition from the cylinder into the expansion chamber. This helps to increase performance from as little as 7,000rpm all the way up to and beyond peak power.
Stephen A’lee of George White Superbikes in the UK independently dyno tested the manifolds on a stock engine MC21, with Stock airbox. The only mods were TYGA pipes.
The red trace shows the above bike using the supplied EXMN-0003 manifold with a peak of 57.2hp.
The blue trace shows the same bike with EXMN-9003 special manifolds fitted. A gain of 1.4hp with no jetting changes.
Compatible with the following TYGA system:
EXCS-0003
EXCS-0005
EXCS-0006
TYGA no: EXMN-9003Â
SKU: hon-10381 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Exhausts, Honda, NSR250 MC18, NSR250 MC21, NSR250 MC28, ShopTriple clamp set CNC black, Honda NSR250 MC21 CBR600 fork
€673.59
Triple Clamp Set, CNC Black, CBR600RR Forks to fit MC21
CNC machined TYGA lower triple clamp for the MC21 NSR250 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Note, we recommend using Handlebar set 48 mm. TYLY-0012 when installing this triple clamp set for best clearance issue with the NSR fairing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-1841
SKU: hon-10556 Categories: ALL products, CNC parts, CNC parts, Honda, NSR250 MC21, Shop