Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
€557.94
2013-2017, Set, Pipe, Full Race System, Ninja 300R, Round Stainless Silencer
We now have a new and improved design to give you the edge in this highly competitive class. Through our continuous R&D, we have enhanced the dimensions of components to squeeze even more power from the Ninja 300 when used with the TYGA system*. Made in stainless steel with spring mounted round Stainless silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.
(* May not comply with noise regulations for some states and territories and may exceed noise regulations for some circuits)
This system is supplied with an round Stainless silencer EXSL-0064
Note, this exhaust system is not suitable for the 2008-12 model. For the 2008-12 model, please see EXPS-0018.
* Please also note that all TYGA-Performance pipe sections and silencers are new for 2017 and thus not compatible with previous 2013-2016 TYGA-Performance Ninja 300 Exhaust pipe sections and silencers.
TYGA no: EXPS-0098
SKU: kaw-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -Carbon cover, temp Gauge 55,5mm, Honda
€25.10
Carbon cover, temp Gauge 55,5mm, Honda
This cover fits snuggly over the original plastic Honda gauge cover and adds a sporty appearance. It is also ideal for hiding any ugly scratches or dents that may have occurred over the years. Fits in second and can be held in place with a dab of glue or silicone adhesive.
This product is suitable for the following models:
MC21 NSR250
MC22 CBR250RR
NC29 CBR400RR
NC35 RVF400
SC28 CBR900RR
TYGA no: BPCC-0026
SKU: hon-10610 Categories: ALL products, Carbon, CBR250RR MC22, CBR400RR NC29, CBR900RR 1992- 95, Honda, NSR250 MC21, RVF400RR NC35, Shop, Various parts, Various partsSilencer left shorty, carbon 70mm
€135.45
Finally available for the Yamha RD350, TYGA Performance full race exhaust.
Set, Exhaust Chamber, Side By Side Type, Stainless Steel, Yamaha RD350LC (4L0)
TYGA Performance combines modern technology and traditional techniques to bring you the best in two stroke chamber design. With the help of advance computer software, and extensive dyno and road testing, we are able to design the optimum chambers for your model motorcycle. Chamber sections are laser cut for precision, but this is where the automation ends. All chambers are hand rolled and welded by our expert craftsmen to give the level of perfection that you’d expect when purchasing a TYGA Performance exhaust system.
Due to popular demand, the TYGA RD350LC 4L0 pipes feature a crossover header design, constructed in mirror finished stainless steel for unrivaled looks.
Parts included with this product:
1 x Left side chamber, mirror finished stainless steel
1 x Right side chamber, mirror finished stainless steel
2 x Manifolds clamps ( Left and Right)
2 x Manifolds
4 x Mounting springs
1 x Shim, Side Stand
Not included are the silencers, We recommend the TYGA shorty silencers.
Please order 2 silencers of choice to complete your order:
EXSL-0067 (Aluminium)
EXSL-0065 (Carbon)
EXSL-0066 (Carbon/Kevlar)
Please note that this exhaust system requires removal of the centre stand.
TYGA no: EXSL-0108L
SKU: yam-10090 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Shop, TZR250 3MA, YamahaKitaco camshaft type 2, Honda MSX125 GROM
€136.63
Developed specifically to increase the top end performance of your Honda MSX125 GROM.
KITACO Type 2 Camshaft
Direct replacement of the standard camshaft. Works with standard valves and valve springs.
This KITACO camshaft does not have the auto decompressor as used on the standard camshaft.
For those who want a Type 1 camshaft, please put this in the comment box at check out.
**Important** Must be used together with the KITACO i-Map Fuel Injection Controller (Map Setting #3). If used alone the engine will run lean and sustain damage.
TYGA no: 300-1432010
SKU: MSX-10308 Categories: ALL products, High performance, High performance, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopKnuckle guard, Honda MSX125 GROM
€132.69
Knuckle Guard, Kitaco. This kit is designed specifically for the MSX125, is provided with mounting hardware and is easy to install
TYGA no: APK20AK53100ZA
SKU: MSX-10064 Categories: ALL products, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop, Various parts, Various partsScreen RC211V, Tyga CBR/VFR/RVF
€52.00
Screen RC211V, Tyga CBR/VFR/RVF
This screen fits the TYGA bodywork.
Carbon exhaust stay, Kawasaki ZXR400L
€95.39
Set, Pipe, Stainless, Full Race System, Stainless Maggot Silencer, ZXR400L
This race system has been specifically developed for the Kawasaki ZXR400L models (L1 up to L9) and has been designed for optimum performance. Linked header pipes for better cylinder filling efficiency over a wide rpm range, and a 4-1 collector allowing maximum power and tuning potential. Made from TIG welded stainless steel sections throughout, with all joints secured by springs.
As well as the improved performance, it saves weight over the stock system and of course, it looks awesome!
It uses the TYGA Moto Maggot silencer, this system may not comply to specific country noise emission regulations and is not homologated for street use. Actually it is extremely loud so be warned!.
Compatibility:
This exhaust can be installed on a bike fitted with the stock or with race bodywork and with or without the passenger pegs installed.
The oil cooler system can be retained. No modifications required.
Please also see EXPS-0137, EXPS-0138 and EXPS-0139 for similar system
Front fender grp, stock shape painted NC23 – NC29 – NC30
€123.95
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFF-0005rosswhite
SKU: hon-11398 Categories: ALL products, Bodywork and carbon, Carbon, CBR400RR NC23, CBR400RR NC29, Honda, Shop, VFR400RR NC30