Set, Pipe, Twin Exit System, High Level, MSX125 2021-, Carbon Oval/Carbon End Cap
€962.68
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
Upper Cowling, Street GRP, NC30, Stock Shape, Assy, Painted Type 1
€541.27
Fuel Tank, Carbon, VFR400R NC30
Top quality reproduction of the steel NC30 fuel tank in carbon fiber. This product is a direct replacement for the stock NC30 fuel tank and saves approx. a third of the weight of the stock one (2.6 kg ours, 3.9kg for the steel one).
Finished in high quality UV resistant clearcoat to show off the beauty of the carbon weave, and using specially formulated epoxy resin for fuel resistance, this tank has been tested with a range of fuels from 95 unleaded pump fuel to E85 (85% ethanol).
Laminated with a Kevlar layer for abrasion and puncture resistance, this fuel tank is both strong and light. Unlike most aftermarket fuel tanks, this one is designed so that there is no compromise with installation and through use of high quality CNC machined aluminium inserts, retains the original associated hardware including the stock Honda or keyless fuel tank filler caps and stock fuel cock.
Like the stock Honda fuel tank, it has the correct plumbing for the Honda type breather valve incorporated in the design and also the overflow/drain tube. Uses the stock Honda mounting rubbers for ease and peace of mind in fitment.
TYGA no: BPFU-0021type1
SKU: hon-11408 Categories: ALL products, Bodywork and carbon, Carbon, Honda, Shop, VFR400RR NC30Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
€367.66
Lower Triple Clamp, CNC Black, CBR600RR Forks/NC30 Shaft
CNC machined TYGA lower triple clamp for the VFR400R/NC30 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-MR7-003
Bearings: 91016-MR7-003
This product is also sold as part of a set
TYLY-1944 Triple Clamp Set, CNC Black, CBR600RR Forks to fit NC30.
Needle roller bearings, set MC16 and MC18 (R2J/R4J)
€51.65
Crankshaft Bearing, Right, NSR250 MC21/28
Genuine OEM KOYO main crankshaft bearing for your Honda NSR250 MC21/28.
See also TYPP-0012SET for set consisting of one each of the left, centre and right crank bearings.
TYGA no: TPER-5008
SKU: hon-11432 Categories: ALL products, High performance, Honda, NSR250, NSR250 MC18Silencer, Carbon/Carbon End Cap, Oval, Slip-On, RVF400, Assy.
€476.54
This easy to fit bolt on silencer replaces the stock heavy aluminium one on the stock system and is an alternative to the more expensive full race system. Constructed from lightweight carbon fibre with carbon exit cap, and aluminium mount cap, it fits in minutes using the original hardware. Stainless steel mounting clamp is provided when you purchase this product.
Note, this silencer may not be legal for some states and territories
Seat cowling (grp) Singel stock shape street, Honda RVF750 RC45
€242.59
Seat Cowling, GRP, RC45, Single, Stock Shape, Street
Stock shape seat cowling, with taillight holes. Single seat, direct replacement for stock RC45 seat cowling in the same shape.
Please note, to order this product without taillight holes, please order BPFT-7141.
Retains use of Honda OEM seat pad
Lower cowling stock , Honda VFR750 RC30
€225.28
Lower cowling “stock “, Honda VFR750 RC30 (hon-10566)
Direct replacement for OEM Honda lower cowling and made to similar thickness as the Honda one for faithful reproduction, strength and stiffness. Can be used with TYGA Performance or factory Honda RC30 upper cowlings
Complete Bodykit set Type 8 White, Honda MSX125 GROM
€329.98
Complete Bodywork Set, MSX125, Type 8, 2015 Pearl Himalaya White Scheme. Transform your bike! Easy and fun to install. With this product, you can afford to have a change of clothes for your beloved MSX125/Grom. Suitable for all models from 2013-2015
This set comprises of a complete set of all the OE Honda panels and decals shown in the photos below for the MSX125. Note it includes the decal ‘MSX125’ not ‘Grom’ as used in some markets. These are all genuine Honda products and not nasty Chinese knockoffs!
TYGA no: BPFS-7028V
SKU: MSX-10312 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, Shop