Set exhausts side by side stainless steel, Honda NSR250 MC18
€962.68
This would the best looking exhaust we ever made, and it performance to!
Tyga Performance is probably the only company offering stainless steel expansion chambers for the MC18. These exquisitely crafted pipes are designed to give maximum power, while at the same time to give sufficient clearance for the MC18 swing arm; quite a demanding feat but one achieved by the curving the header design. This system has the two silencers exiting, not unlike the 1989 MC18 stock system, in the high level left and right position and the silencer clamps are provided which mount onto the stock 1989 silencer mounting brackets.
For the 1988 MC18, this system can be installed but requires removal of the passenger footpeg hangers and replaced with special TYGA silencer brackets (not included in this set) So for 1988 owners, remember to order 2 x BPSY-0130
Parts included with this product:
1 x left side chamber, side by side (left exiting) stainless steel
1 x right side chamber, side by side (right exiting) stainless steel
2 x silencer single clamps and mounting bolts, washers and nuts
2 x manifolds
2 x mounting flanges
4 x mounting springs
1 x Radiator lower mounting stay
1 x lower cowling rear mounting stay
Not included are the silencers which you need to select from our choice of aluminium, carbon and carbon/Kevlar types. Important! To complete your Tyga exhaust system remember to order 2 silencers with every chamber set.
TYGA no: EXCS-0003Â
SKU: hon-10357 Categories: 2 stroke exhaust sets, ALL products, Exhausts, Exhausts, Honda, NSR250 MC18, ShopAirbox "GRP", Honda NSR250 MC21/MC28
€423.04
Airbox, GRP, NSR250 MC21/MC28
This high quality GRP air box is an adaptation of the HRC air box and has the following features.
Maximum volume, more than double the size of the stock air box for better flow and power
High flow, large area foam filter for street use
Snug fitting rubber base to prevent leaks around carb insulators
Designed to be used with a full street harness as well as race harness
Can be used with MC21 and MC28 models or combination of either model (fuel tanks, harnesses and carburetors)
Allows for use of carburetor solenoids and supplied with special mounting hardware
Allows for use of two stroke oil pump and supplied with holes for cables and lines as well as blanking plugs
Uses HRC seal gap , part number 64234-NX5-770 for a good seal with the fuel tank
Built in high grade epoxy and GRP for light weight
Provided with a hole and seal for external fuel cock as well as a short type for racers who want ease of removal of fuel tank
See also BPCX-0007 for the same airbox in carbon/kevlar
*please do note some product photos are for reference and show the Carbon/Kevlar version fitted on our NSR250 project bike
TYGA no: BPFX-0007
SKU: hon-11070 Categories: ALL products, Bodywork and carbon, High performance, High performance, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Tank Protector, Carbon, NSR250 MC21
€120.42
Tank Protector, Carbon, NSR250 MC21
This real carbon protector is designed to fit snuggly on the NSR250 (MC21) fuel tank and will prevent scratches from zippers etc. It will also add some individual style to your pride and joy.
TYGA no: BPCX-0028
SKU: hon-11192 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, NSR250, NSR250 MC21VHM cylinder head (2 pieces), Honda RS250 NXA
€544.90
VHM cylinder head (2 pieces), Honda RS250 (alg-10174)
VHM are a respected manufacturer of high quality racing parts used by factory teams world wide.
We are pleased that we can offer VHM products on our website.
The VHM cylinder head is designed with central spark plug position for superior burn, and removable combustion chamber inserts so that changes of compression ratios are quick and simple, and no more wasted head gaskets thanks to the O-ring design
This head set comes with following parts:
2x cylinder head
2x standard insert (12.0cc)
This VHM head set uses the standard water hose spigots. The standard spark plugs may be used.
Detailed instruction on the setting up of VHM heads can be found on their website at www.vhm.nl
TYGA no: AA33169Â Â Â Â
SKU: alg-10174 Categories: ALL products, CNC parts, Honda, RS250R NF5 / NX5, Shop, Various parts, VHM productsSection, Collector, Intermediate, Rear, Stainless, NC30/35
€135.29
Intermediate (primary) collector for rear headers. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-6002
SKU: hon-10850 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsCarbon exhaust guard, Honda NR750
€130.42
Exhaust Guard, Carbon, Honda NR750
This lightweight carbon exhaust guard replaces the heavy and ugly steel stock one and is molded the same shape for easy installation. This product is made using specially formulated high temperature resin and has a backing layer of carbon/Kevlar. Note this should be installed with mat, heat guard 50608-MT7-000 (NOT INCLUDED) or similar to prevent excessive heat reaching the guard.
Please note the photos of the heat mat 50608-MT7-000 are for reference and is not included with this product.
Carbon upper cowling race ,KTM RC125/RC200/RC390
€300.99
Upper Cowling, Race (Carbon), KTM RC125/200/390
This lightweight carbon upper cowling replaces both the heavy and brittle clear front cowling and the black plastic part underneath to save weight, add strength and make for easy assembly. Finished in tough UV resistant clearcoat, no need to paint. Install and ready to use! A must for anyone racing the RC390!
Note this product requires windscreen model SCRE-0163 or SCRE-0164 to complete the race conversion
Update your bike with this great TYGA performance, KTM power part!!
TYGA no: BPCU-7131
SKU: ktm-10043 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Carbon, KTM, RC 125/200, RC 390, ShopCarbon heel guard right, ninja 400
€43.13
Replacement Right heel guard for TYGA step kits, see model below.
STAA-0026 (Kawasaki Ninja 400)
TYGA no: Carbon heel guard right, ninja 400
SKU: kaw-10110 Categories: ALL products, CNC parts, Kawasaki, Ninja 400R 2018-