Upper Cowling Right (Carbon), NC30/35, T13 Style , Assy.
€254.73
This a replacement part for bodywork sets BPFS-0116 and BPFS-0120
TYGA no: BPCU-9218R
SKU: hon-10815 Categories: ALL products, Bodykit replacement parts, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Front fender (GRP), HRC NSR250 replica
€75.27
Front Fender, GRP, HRC NSR250 replica
Front Fender, Factory HRC NSR250 Racer Style. This front fender is designed to fit HRC factory NSR250 forks but could possibly made to fit other models with suitable mounting hardware. It is similar in styling to the front fenders used by factory riders such as Cadalora, Biaggi, Ukawa, Okada etc. in the years 1992-1995. The reason for this fender being in our line up is we were lucky enough to source some factory forks and needed a fender to go with them and wanted something as close the original as possible and designed it from photos and memory so while similar, it is not an exact replica. In any case if you look at the fenders used by HRC at that time, you can see that there are slight differences between years and bikes.
We don’t know if it will fit any other models but we know it does not fit any other front ends that we have tested it on such as NX5, RVF400, NSR50 MC18/21/28 etc.
TYGA no: BPFF-0007
SKU: hon-10942 Categories: ALL products, Bodywork and carbon, CNC parts, Honda, RS250R NF5 / NX5, ShopCarbon exhauststay left, Suzuki RGV 250
€29.88
Carbon Exhaust hanger stay for RGV250. This product is used to secure the left side silencer for systems with a side by side silencer. It can be used with or without the passenger footpeg assembly so it is suitable for both street and race bikes
Compatible with the following TYGA exhaust systems:
EXCS-0009
EXCS-0014
Let your bike stand out from the crowd with this beautiful carbon fibre product.
TYGA no: BPCC-0012L
SKU: suz-10004 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, RGV250 VJ22, Shop, SuzukiSubframe aluminium , Honda RVF400 NC35
€493.97 €444.57
This lightweight aluminium subframe is closely modelled on the stock NC35 subframe and can be substituted for the heavy steel one with a weight saving of XXX. Made from extruded and CNC machined 6000 series aluminium, this product is hand-welded by our craftsmen to provide a strong, accurate and beautiful component. Finished in Hard wearing satin black powdercoating, it can be painted if the customer so chooses.
Note this subframe is for race and single seat use only and cannot be used for carrying a passenger. All mounting positions for exhaust stay, seat cowling, seat pad, undertray, radiator overflow bottle, electrical components etc which are normally mounted to the subframe are supplied with subframe, there are even two mounting holes in case you wish to install a remote reservoir rear shock (BPCC-0046 is a direct fit), so it is almost a simple plug and play. Most of the standard fasteners are used, however where necessary, replacements are included.
If you wish to run this subframe without the rear fender, then this is also possible and we recommend installing it along with Seat cowling bracket part number: TYLY-0224-17 and battery box TYLY-0026. In this configuration, you will need modify the rear mounts of the battery box and drill them to attach to the subframe and to cable tie, starter relay etc which are normally attached directly to the undertray
TYGA no: TYLY-0225
SKU: hon-10985 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35, Shop, Various partsFront stay steel, standard, Suzuki RGV250 VJ22
€95.39
CNC machined TYGA triple clamp set for your RGV250 VJ22.
These stylish, all aluminium triple clamps are a direct replacement for the OEM VJ22 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered without seals and bearings, but include an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy. Weights 1800 gram.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
Update your RGV250 with these light, strong and cool triple clamp set.
TYGA no: TYLY-0261
SKU: suz-10210 Categories: ALL products, CNC parts, RGV250 VJ22, Shop, Suzuki, Various partsSeal, Sw/Arm Bearing L., MC28
€6.00
Seal, Sw/Arm Bearing L., MC28
TYGA no: 91202-MR7-003
SKU: hon-11114 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Tail tidy street legal set with slime line indicators , Honda MSX125 2021-
€120.46
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: TYLY-0276
SKU: msx-10499 Categories: ALL products, Honda, MSX125 2021-, Shop, Various partsCarbon engine covers pair 2016 – , KTM Duke / RC390
€240.76
Carbon engine covers pair 2016 – ’20, KTM Duke – RC390
This engine protective cover set is made from lightweight carbon with an abrasion resistant inner layer of Kevlar. Now requirement for many racing classes and a sensible and attractive addition to a road bike.
Note: This product does not fit the 2014-2015 model KTM RC390 due to a revised design of the left side engine cover.
2014-2015 Model: Left engine case, KTM part number: 90230002133 (BPCC-7331L fits). Choose BPCC-7331 not BPCC-7531 if you would like to order set of left and right cases.
2016-2017 Model Left engine case, KTM part number: 93730002000 (BPCC-7531L fits). Choose BPCC-7531 not BPCC-7331 if you would like to order set of left and right cases.
TYGA no: BPCC-7531
SKU: ktm-10081 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Carbon, CNC parts, Duke 390 2012-16, Duke 390 2017 -, KTM, RC 390, RC390 2022-