Bar end weight (pair), Honda CBR250RR MC22
€21.46
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-0322
SKU: hon-11468 Categories: 4 stroke exhaust sets, ALL products, CBR250RR MC22, Exhausts, Honda, Shop, SilencersExhaustset race Stainless steel, aluminium silencer, Honda CBR250R
€411.44
The TYGA Full Race System has been designed with maximum power mind. This system is a necessity if you need to squeeze every drop of horse power from the machine.
Manufactured from TIG welded stainless steel sections throughout, with all joints secured by springs, for that ‘factory’ look and feel. For unsurpassed looks, sound and performance, this system is supplied with silencer EXSL-0040. If you need further reason to purchase this product, this exhaust is considerably lighter than the stock system. Weighing only 3 kg instead of the 8 kg of the stock system
TYGA no: EXPS-0030
SKU: hon-10304 Categories: 4 stroke exhaust sets, ALL products, CBR250R 2011 - 15, Exhausts, Exhausts, Honda, ShopClutch lever silver, NC29 NC30 NC35
€29.95
CNC machined out of solid billet. Dog legged lever for Honda 4 stroke models such as NC23, 29, 30, 35 etc and similar models. (See alternative straight version for NSR250 and CBR250RR).
TYGA no: LEVC-9032Â
SKU: alg-10055 Categories: ALL products, CBR400RR NC23, CBR400RR NC29, CNC parts, CNC parts, CNC parts, Honda, RVF400RR NC35, Shop, VFR400RR NC30Set pipe, Full race with round stainless silencer, Kawasaki ZXR250/300 2013 –
€548.01
.Set, Pipe, Full Race System, Ninja 250R/300R, Round Stainless SilencerThis full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted carbon silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! Unlike the stock system and most other aftermarket full systems, the TYGA Performance full race system is routed up the right side of the bike for the best possible gas flow and the performance figures support this. Please see below.(May not comply with noise regulations for some states and territories and may exceed noise regulations for some ciircuits)This system is supplied with a stainless round silencer.<iframe width= 560 height= 315 src= https://www.youtube.com/embed/aFjJq-crAQ8 frameborder= 0 allowfullscreen></iframe>
Please see the two dyno graphs from Kawasaki Racing Australia who independently tested the TYGA system against the stock system and also against a well known competitor. The figures clearly show the advantages of installing a TYGA full race exhaust whether it be for street or for race use.Graph 1 shows 8.5% more power over stock just from installing the TYGA Full systemGraph 2 shows the peaks are very similar but look how the TYGA system has more power everywhere else, up to 10% more power in the important 9,000 to 10,000 range. The Leo Vince exhaust was mapped for 98 octane and the Tyga for 91 which should give an advantage to the Leo.
TYGA no: EXPS-0047
SKU: kaw-10030 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R/300R 2013 -, ShopDecal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
€7.11
Decal, Side Fairing, Ninja Silver, Ninja 250R 2008 -12
TYGA no: 56054-0056
SKU: kaw-10191 Categories: ALL products, Kawasaki, Kawasaki OEM parts, Ninja 250R 2008- 12, ShopPassenger seat cover T9, CBR400RR
€66.24
This stylish seat cover replaces the passenger seat pad on the NC23. Simply unbolt the original and replace with the cowling. Access to the luggage compartment is still retained.
For use with BPFT-9027 only. Not for use with stock seat cowling.
Carbon front fender support, Honda Monkey 125 2018-
€124.31
Carbon front fender support, Honda Monkey 125 2018-
Carbon direct replacement for original part. Lighter and looks way, way cooler!
TYGA no: BPCX-7542
SKU: msx-10431 Categories: ALL products, Bodywork and carbon, Honda, Monkey 125 2018-, ShopTail light cover, Aprilia RS250 Tyga
€17.20
This cover is made specifically for the TYGA bodywork kit (BPFS-0103). Fills in the light holes to make a smooth seat cowling for race use.
Not suitable for the stock bodywork
TYGA no: BPFX-9330Â
SKU: apr-10043 Categories: ALL products, Aprilia, Bodykit replacement parts, Bodywork, RS250, Shop