Clamp, Silencer, Single, 90 mm., Assy.
€25.21
Stainless steel clamp. 90 mm. internal diameter with rubber protection for a firm, but friendly grip on your silencer. Includes mounting bolt, nut and washer.
Compatible with Silencers EXSL-0024 and EXSL-0025.
Seat Cowling (With Carbon), NC35 T13, Assy.
€361.17
This is the seat cowling with carbon (front section and around top and bottom air ducts) and is used in the NC35 T13 style seat cowling kit BPFS-0118.
This product is suitable as a replacement seat cowling in the event of damage to the one in the set. It is also ideal for somebody wishing to custom fit it to another model. Please note it will need modifying to fit anything other than the NC35.
To be used with
subframe TYLY-0025
battery box TYLY-0026
taillight BPLT-0013
Indicators BPLT-0020L and BPLT-0020R
registration/license plate holder BPCX-9118/BPFX-9118
TYGA no: BPCT-9218
SKU: hon-10809 Categories: ALL products, Bodykit replacement parts, Bodywork, Bodywork and carbon, Honda, RVF400RR NC35Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
€920.57
Kit, Fairing Set, GRP, (Street) MC21, MC28, NSR250V
Modelled closely from the front fairing set taken off an actual NSR500V HRC factory machine, this kit has been designed to faithfully reproduce the appearance and silhouette of the NSR500V but to allow it to fit the NSR250 with correct mounting points and clearances. This fairing set can be installed with both the MC28 and the MC21, (and possibly the MC18, though we have not tried that model).
The set consists of the parts shown below and has a special TYGA designed triple beam LED headlight unit subtly located in what would normally be the front air duct. All special mounting hardware and windscreen is provided. Note, you do not need to change the meter stay for either the MC21 or MC28 models to install this fairing which bolts to the stock meter and rear frame spar side stay and lower stay locations with all hardware provided.
The fairing can be used with stock and all TYGA exhaust systems including use with the specially designed 250V exhaust system EXCS-0047
We recommend installing this fairing set with seat set BPFS-0196 on the NSR250 to complete the NSR250V bodywork style. For a complete transformation of the whole bike, we also recommend exhaust system EXCS-0047 and EXSL-0083 or EXSL-0084.
TYGA no: BPFS-0195
SKU: hon-11055 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, Bodywork and carbon, High performance, Honda, NSR250, NSR250 MC21, NSR250 MC28Mirror blanking plate silver, Honda VTR1000 SP2
€39.50
Handy mirror blanking plates for your VTR1000 SP2.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 40mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
€31.32
Carb Service Kit B, 19 pieces, Honda CBR400RR NC29
LiteTek Carburettor Seal Kit to suit
Honda CBR400RR NC29
Made from long lasting, ethanol resistant elastomers and Viton®
Consist of the following items:
2x OR-019 Vacuum O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
6x OR-016 Fuel O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No. 16040-MN4-000)
4x OR-014 Float Breather O-Ring, Material: Viton 70A, (Part of Honda Assembly Part No.16040-MN4-003 superseded by 16040-MM5-601)
4x CS-005 Choke PLunger Cap, Material: HNBR, (Part of Honda Assembly Part No. 16046-KT8-003)
3x SC-008 Throttle Synch Screws, Material: Stainless Steel
Please also see Honda CBR400RR NC29 Carb Service Kit A, 20 pieces.
TYGA no: CKB-Honda-NC29
SKU: alg-10355 Categories: ALL products, Carburettor Service Kits,, CBR400RR NC29, HondaCarbon heel guard left,
€33.11
Replacement left heel guard for Tyga step kits, see model below. TYGA design, but will also fit standard Aprilia RS-250 hanger.
STAA-0006
STAA-0024
STAA-0124
TYGA no: BPCC-9007
SKU: apr-10027 Categories: ALL products, Aprilia, Bodywork and carbon, Carbon, CNC parts, CNC parts, KTM, RC 125/200, RC 390, RS250, Shop, Various partsPod Filter, Down-10°, Suzuki RGV250 VJ21/VJ22
€52.66
Pod Filter, DOWN-10°, RGV250 VJ21/VJ22
Replacement Pod Filter.
For complete set please see TPER-0100
TYGA no: TPER-0100B
SKU: suz-10150 Categories: ALL products, Aprilia, Bodywork and carbon, High performance, RGV250 VJ21, RGV250 VJ22, Shop, Suzuki, Various parts, Various partsCarbon fairing set street GP-T, Honda RVF400 NC35
€1,889.29 €1,700.36
The ultimate faring set for your Honda RVF400 NC35!!
Kit, Fairing Set, Carbon, (Street), NC35 GP-T
This modern fairing, designed in-house by TYGA Performance, is the culmination of 15 years of experience developing bodywork for the NC35. As well as bringing the NC35 up to date, it also offers a useful weight saving and easy fitment and removal. The kit is supplied with all mounting hardware including carbon fiber side stays and aluminium upper and front stays. The headlights used in this kit, are LED and consist of two units either side with 2 on low and 4 on high beam. The system uses a lot less current than conventional halogen systems while at the same time being discrete but stylish. Please note that the headlights do not comply with road use regulations and are unsuitable for high speed riding on unlit roads.
Like all our fairings, this product uses only the best epoxy resins and high quality fabrics to give a strong, light and flexible panel. All our products are hand made by our skilled craftsmen and are built to a very high standard.
As well as this fairing BPFS-0147 which is made using carbon fiber panels finished in high gloss UV protective clearcoat, we offer a similar product using GRP (glass reinforced plastic) which is primed and ready for paint**. See BPFS-0145
* A clear screen is provided unless you specify tinted in the comment box at check out.
** We recommend trial fitting and making and minor adjustments before painting
TYGA no: BPFS-0147
SKU: hon-10602 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, Honda, RVF400RR NC35