Top triple clamp CNC silver , Honda RVF400 -> CBR600 fork
€263.52
Top Triple Clamp, CNC silver, CBR600RR forks NC35/MC21/MC28 Conversion
CNC designed and manufactured in house as a direct replacement for the standard top triple clamp. Facilitates mounting holes for securing the ignition switch holder assy TYLY-0041 for use on NSR conversion or TYLY-0042 for NC35 conversion.
Crafted from aircraft spec 6061-T6 aluminium, using high technology 3D machining, the TYGA clamp offer high strength while being lighter than the standard component, and offers an improved and individual look to your bike.
TYGA no: TYLY-0059
SKU: hon-10552 Categories: ALL products, CNC parts, Honda, Shop, Stock list, all modelsCarbon shroud (pair), Honda MSX125 2021-
€451.95
Carbon front fender “sport style”, Honda MSX 125 (MK1 MK2) Monkey 125 2018-
Sports style Carbon front fender to give your Monkey 125 or MSX125 Grom* a clean and unique appearance. Easy install with mounting bolts provided.
See also BPFF-7142 for GRP version.
*Note that when this fender is installed on the MSX125 Grom, it uses using just the four bolts in front of the fender and the two mounting holes behind the fork leg for the stock fender on the Grom are not used. For the Monkey, it mounts on the fork guard mounting holes.
TYGA no: BPCX-7248
SKU: msx-10501 Categories: ALL products, Bodywork and carbon, Honda, MSX125 2021-, ShopFuel Tank, GRP, NSR250, MC21, Painted Rothmans
€1,304.96
Triple Clamp Set, CNC Black, NC35 Forks to fit CBR250RR MC22
CNC machined TYGA triple clamp set for the CBR250RR MC22 to take 50 mm / 52 mm diameter RVF400 NC35 forks.
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
They are delivered ready to fit with all necessary bearings and lower seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ ignition switch/lock holder fitted, which can be removed for racing.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: BPFG-0004Painted
SKU: hon-11281 Categories: ALL products, Bodywork, Bodywork and carbon, Honda, NSR250, NSR250 MC21, Shop, SilencersSub-frame (TYGA), Suzuki RGV250 VJ22
€143.58
This subframe is a replacement for the stock Suzuki item and to be used in our TYGA seat cowling kits BPFS-0036, BPFS-0037, BPFS-0038 etc. and bolts up to the VJ22 frame without need for modifying any components. It will not fit the stock Suzuki seat cowling.
The subframe is supplied with all the fasteners needed to mount the various components that are housed under the seat cowling and incorporates a battery tray. This product is made in steel but is much smaller than the stock one and weighs much less without compromising strength.
Not to be used on a motorcycle carrying a passenger and rider.
This subframe is only compatible with the TYGA rear seat, the original seat cowling won’t fit.
TYGA no: TYLY-0028Â
SKU: suz-10089 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, RGV250 VJ22, Shop, Suzuki, Universal partsRear shock holder, Honda VFR400 NC30
€18.50
Holder, Shock Reservoir, NC30
This stay mounts to the underside of the seat cowling sets BPFS-0148 and BPFS-0150. Supplied complete with clamps and mounting hardware.
Compatible Parts
TYGA seat cowling sets, BPFS-0148 and BPFS-0150
TYGA no: BPSY-0182
SKU: hon-10581 Categories: ALL products, Bodykit replacement parts, Bodywork and carbon, VFR400RR NC30Seat pad small, flat
€46.69
Vinyl covered medium density foam race seat pad provides a maximum amount of feedback from the bike and minimum comfort!
Underside of seat has velcro stitched in. Kit is supplied with a strip of Velcro with strong 3M adhesive tape appied on the underside. Easy installment. Cut the strip to size using scissors, one each side recommended. Then simply peel back the protective layer on the adhesive strip, lay the strips on the seat cowling and place the seat pad in position.
Compatible Parts:
Tyga Tail cowling: BPFT-9026 and BPCT-9026
TYGA no: BPSP-0001BÂ
SKU: alg-10078 Categories: ALL products, Bodywork, Bodywork and carbon, Bodywork and carbon, RGV250 VJ21, RGV250 VJ22, ShopCarbon rear hugger TYGA, Honda MSX125 Grom 1st + 2nd gen.
€249.58
Rear Hugger, (Carbon) TYGA Style. MSX125 Grom. Includes integrated chain guard and replaces the stock plastic part. Easy to install, lighter and looks way, way, cooler!
TYGA no: BPCH-7128
SKU: MSX-10174 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, ShopLower triple clamp CNC Silver, Honda RVF400 -> CBR600 fork
€367.66
Lower Triple Clamp, CNC Silver, CBR600RR forks/NC35 shaft
CNC machined TYGA lower triple clamp for the NC35 RVF400 to take 53 mm diameter CBR600RR forks. (For later model CBR600RR which use 54 mm forks, we can supply by special order so please send us an email or put a comment with your or der that you need 54 mm and not the default 53mm.)
Designed and machined in-house by TYGA from aircraft spec 6061-T6 alloy. FEA tested and developed for increased strength without unnecessary weight increase.
This product does not include headstock seals or bearings. To complete the set we recommend you also order:
Seals: 53214-371-010 & 53214-KA4-701
Bearings: 91015-KT8-005 & 91016-KT8-005
This product is also sold as part of a set TYLY-0742, Triple Clamp Set, CNC Silver, CBR600RR Forks to fit NC35.