Cowling Right black, Honda MSX125 GROM
€23.35
Cowl, R., RR., Asteroid Black Metallic
TYGA no: 77215-K26-900ZA
SKU: MSX-10012 Categories: ALL products, Honda, MSX125 2013 - 2015, OEM parts, ShopToptripleclamp nut, RGV250 / RS250
€30.34
Top triple clamp nut. CNC 3D machined from 7075 T6 aluminium. Light weight and good looking. Clear anodised for a long lasting finish.
This nut is a direct replacement to the top nut on:
Suzuki VJ21,
Suzuki VJ22
Aprilia RS-250
Suzuki SV650
and others. The thread is M22X1.
Torque setting: 65Nm
TYGA no: TYLY-0048
SKU: alg-10013 Categories: ALL products, Aprilia, By product, CNC parts, CNC parts, CNC parts, RGV250 VJ21, RGV250 VJ22, RS250, Shop, Various partsTriple Clamp Set, CNC, Silver 3D Top Triple Clamp, Black Lower Clamp, NC35 RVF400
€673.59
CNC machined TYGA triple clamp set for your NSR250 MC28.
These stylish, all aluminium triple clamps are a direct replacement for the MC28 triple clamps, and with the help of FEA testing not only do they look fanstastic, but they perform!
They are delivered ready to fit with all necessary bearings and bottom seal, and even an aluminium top clamp nut, to complete the transformation. The top clamp has the ‘bolt-on’ key holder fitted, which can be removed for racing.
The Steering stoppers are reversible, giving maximum steering lock for street application, or a reduced angle for racing.
Designed and CNC machined in house by TYGA from aircraft spec 6061-T6 alloy.
Tightening recommendations:
Lower clamp pinch bolts: 23Nm.
Top clamp pinch bolts: 23Nm.
TYGA no: TYLY-3312
SKU: hon-11265 Categories: ALL products, CNC parts, CNC parts, Honda, RVF400RR NC35, Stock list, all modelsSet full race system with moto maggot silencer, Honda MSX125 GROM
€409.54
Set, Pipe, Full Race System, MSX125 Grom, Moto Maggot. First Generation
This full race system has been specifically designed for the MSX125 to maximise power. Made in stainless steel with spring mounted carbon silencer this system increases performance, saves weight and enhances the looks of the bike. Sounds great too!
Total weight of the set is 2300 grams
Performance and Dynograph
The blue trace shows the 100% standard Honda MSX125 Grom, compared to the red trace, which is after installing the TYGA Full System set (EXPS-0043), and Carbon Silencer (EXSL-0042). Similar results would be expected with the Maggot.
A useful gain all through the range, increasing as the revs rise up to maximum.
Similar Products:
Please also see:
EXPS-0041 Carbon Oval Silencer System
EXPS-0052 Stainess Oval Silencer System
EXPS-0065 Moto Maggot High level System for 2016 MSX125SF second generation Grom
Compatibility:
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<iframe width= 560 height= 315 src= https://www.youtube.com/embed/q4RjGB7doOM frameborder= 0 allowfullscreen></iframe>
TYGA no: EXPS-0042
SKU: MSX-10133 Categories: ALL products, Exhausts, Honda, MSX125 2013 - 2015, ShopSilencer carbon oval, m carbon cap (4 stroke) 2
€394.60
This silencer has a carbon endcap and a carbon tube to produce a modern, attractive and lightweight product. Free flowing, this silencer not only allows for more power but gives a much more rewarding audible experience over stock. This system may not comply to specific country noise emission regulations and is not homologated for street use.
The ‘slip-on’ mount is 2 internal diameter, so is compatible with our existing TYGA NC30/35 pipe and any other system with a 2 external diameter tail pipe. It is secured in place with two springs, which align with the spring hooks already fitted to the TYGA pipe.
Two extra (stainless) spring hooks are included and can then be welded to any other system that may need modification to fit the silencer.
For use with pipe set EXPS-0012 or any system using a spring mounted 2 inlet.
Please also look at our Project bikes page, to see the actual product on a bike or just to get some ideas.
TYGA no: EXSL-0035
SKU: alg-10070 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Exhausts, Exhausts, Honda, RVF400RR NC35, Shop, Silencers, VFR400RR NC30Section header #3-4 stainless, Kawasaki ZXR400L
€234.71
Section, Header, #3-4, Stainless, ZXR400L
Header section, Cylinder 3-4, used on TYGA-Performance Kawasaki Exhaust Systems:
EXPS-0137
EXPS-0138
EXPS-0139
EXPS-0140
Racing step kit CNC silver, Honda NSR150
€330.17
TYGA Performance racing step kit assembly. Designed in-house by TYGA Performance using AutoCAD software, these CNC machine- made step kits are made from top quality, aircraft grade aluminium. Features levers moving on ball bearings to give precise and smooth movement, and comes complete, ready to bolt on with stainless steel fasteners. One of the many advantages over the standard footrest assembly is the ability to reverse the shift pattern without removal of the side stand, so giving the ‘racer’ set-up, on the street. Kit includes gear selector link rod.
Now includes rear brake light switch provision.
TYGA no: STAA-0001Â
SKU: hon-10281 Categories: ALL products, CNC parts, CNC parts, Honda, NSR150SP, ShopUnder Cowl, Belly Exhaust Type, (GRP), Red, MSX125
€196.87
Under Cowl, Belly Exhaust Type, (GRP), Red, MSX125
Bling up your grom with this cool component. High quality mounting hardware provided and easy to install. Although this will fit all MSX125 Groms with stock Honda or TYGA exhausts, it was designed specifically to be compatible with low mount belly exhausts including:
– Honda low mount stock exhausts supplied with the second generation 2016 MSX125SF models
– TYGA belly exhausts EXPS-0064 and EXPS-0068 (which are suitable for all model MSX125SF Groms)
See table below for more information.
Note, please check compatibility of under cowl/belly pan with exhaust before ordering. Our products are designed to fit the widest range of products and models but in some cases TYGA products made for the first generation MSX125 Grom are not compatible with the second generation. Please refer to table before ordering.
<a href= {{media url= wysiwyg/46-undercowl-bpfl-cl-7328-online-e5eb2cb5.pdf }} target= _self >Click here for PDF</a>
TYGA no: BPFL-7328 R
SKU: MSX-10365 Categories: ALL products, Bodywork and carbon, Bodywork and carbon, Honda, MSX125 2013 - 2015, MSX125SF 2016 -2020, Shop