Aluminium fairing stay, Honda VFR400 NC30
€130.42
Direct replacement for stock item, 50% of the weight
Compatible Parts:
Upper cowlings: OEM Honda NC30, BPFU-0009, BPFU-0010, BPFU-0011, BPFU-0012, BPFU-0014, BPFU-0016 and BPFU-0020, for use with NC30 model only
Please note:
This product is designed for racing use to support the upper cowling and when used on a street use on bikes where the upper stay is needed to mount the mirrors some vibration in the mirrors will occur.
Beautiful, perfect fitment and give your bike that HRC look.
Brake Lever, MC28
€118.57
Brake Lever, MC28
TYGA no: 46500-KV3-830
SKU: hon-11145 Categories: ALL products, High performance, Honda, New OEM Honda parts, NSR250, NSR250 MC28Section, Header, Left, Stainless, Yamaha R25/R3
€119.01
Section, Header, Left, Stainless, Yamaha YZF-R25 and YZF-R3
Used with EXPS-0072, EXPS-0073, EXPS-0074 and EXPS-0075.
Section, Header, Rear Right, Stainless, NC30/35
€135.29
Header, Rear Right. Used on:
EXPS-0002 Set, Pipe, Full Race System NC30-35 (No Silencer)
EXPS-0011 Set, Pipe, Full Race System NC30-35 Maggot Silencer
EXPS-0028 Set, Pipe, Full Race System NC30-35, Oval Carbon/Carbon End Cap Silencer
EXPS-0012 Set, Pipe, Full Race System NC30-35, Oval Stainless Silencer
EXPS-0053 Set, Pipe, Full Race System NC30-35, Round Aluminium Silencer
EXPS-0010 Set, Pipe, Full Race System NC30-35, Round Carbon Silencer
EXPS-0026 Set, Pipe, Full Race System NC30-35. Round Carbon/Carbon End Cap Silencer
EXPS-0003 Set, Pipe, Twin Stack System, Carbon Silencers
EXPS-0005 Set, Pipe, Twin Stack System, Stainless Silencers
TYGA no: EXPT-3002
SKU: hon-10848 Categories: ALL products, Exhausts, Exhausts, Exhausts, Stock list, all modelsSet, Pipe, Full Race System, Ninja 250 2008-12, Moto Maggot Silencer
€491.32
This full race system has been specifically designed for the Ninja 250 to maximise power. Made in stainless steel with spring mounted aluminium silencer this system significantly increases performance, saves weight and enhances the looks of the bike. Sounds great too! (May not comply with noise regulations for some states and territories)
This system is supplied with a Moto Maggot silencer EXSL-4013
Independent Review:
TYGA Ninja 250R Race Exhaust System Dyno Results
October 29th, 2010 Adam
2008 Ninja 250R Dyno: TYGA Round Aluminum Race Exhaust System vs. Stock Exhaust
I’m a private party and this is my review of the TYGA Round Aluminum Race System. I am not a dealer, nor do I work for TYGA, but I’m a street rider and club racer. I’m reviewing this because I found little to no information regarding this system and I wanted to share my findings with others who found themselves in the same predicament as me (how can I pay less and not sacrifice performance!?!?). I scoured the internet but found no proof this system would give me any performance gains. I knew TYGA was a reputable manufacturer of quality products so I took a leap of faith and boy did it pay off!
Ninja 250R Dyno results are for the following runs:
Black: Stock Exhaust (no modifications whatsoever)
Blue: Stock Exhaust (snorkel removed)
Red: TYGA Round Aluminum Race System (snorkel removed)
Note: Carbs were not jetted. Fuel mixture screws were not adjusted.
HP Gains:
1) Remove snorkel ( 1.5HP) == 28.1HP!
2) Install TYGA Round Aluminum Race System ( 4.2HP) == 32.3HP!
Total: 5.7HP ( 4.2HP from TYGA exhaust!)
Weight Comparison (lbs):
Stock | Header: 4.1 | Can: 10.5**| Total: 14.6 lbs
TYGA | Header: 3.4*| Can: 2.6**| Total: 6 lbs
TYGA no: EXPS-0032
SKU: kaw-10086 Categories: 4 stroke exhaust sets, ALL products, Exhausts, Kawasaki, Ninja 250R 2008- 12Splitpen pro arm
€2.49
This R-Clip is a simple and racey look alternative to the standard slip pin used in the rear wheel axle of all Honda Proarms.
TYGA no: NUBO-0001
SKU: hon-10119 Categories: ALL products, Honda, NSR250 MC28, RVF400RR NC35, Shop, Universal parts, Various parts, Various parts, Various parts, VFR400RR NC30, VFR750R RC30Bodykit complete MiniRacerXtreme, Honda MSX125SF GROM
€1,637.22
Bodywork Set, (GRP), MRX, MSX125SF Second Generation Grom
This kit is the ultimate modification for your MSX125SF Grom converting it to a mini racer for the road or track depending on how the mood takes you. The kit is comprehensive and is supplied with all mounting hardware and components including, headlight, handlebars, top triple clamp and mirrors.The panels are made from high quality GRP using high quality epoxy resins for strength and lightness and are primed ready to apply paint. The shape lends itself to most liveries and ideal for promoting your business or race team.
With improved ergonomic and aerodynamic performance, this kit will increase top speed and agility as well as give a whole new riding experience for the MSX125SF Grom. Ideal for buddying road racers for honing racecraft and riding skills, or just a fun project to stand out from the crowd, the MRX will put a smile on everyone’s face.
This body kit MUST be used with a high level exhaust because there is no space for the belly type in the fairing lower. We recommend the following exhaust systems:
EXPS-0065
EXPS-0066
EXPS-0067
Comes with a free MRX Bike Dust Cover
Note this kit is specific to the MSX125SF second generation Grom. For the first generation kit, please order BPFS-0127 and BPFS-0128
TYGA no: BPFS-0155
SKU: MSX-10391 Categories: ALL products, Bodywork and carbon, Carbon, Honda, MRX, MSX125 GROM, MSX125SF 2016 -2020Mirror blanking plate black, 30mm
€40.73
Handy mirror blanking plates for your 250/400 sportsbike.
No need for ugly cable ties on those all important track days. These CNC machined blanks will secure your cowling and keep you looking stylish.
Mounting pitch is 30mm, so will fit many models.
2x Mirror Blanking plates and 4x stainless bolts are supplied, but you can use your standard mirror mounting nuts to secure.
TYGA no: TYLY-1056
SKU: alg-10126 Categories: ALL products, Honda, NSR250 MC21, NSR250 MC28, RGV250 VJ22, RVF400RR NC35, Shop, Suzuki, Universal parts, Various parts, Various parts, Various parts, Various parts, Various parts, VFR400RR NC30